@article { author = {Ardebili, Amirreza and Farahani, Mohammadreza and Asghari, Saeed}, title = {Thermography with Radiation Excitation for Non-Destructive Evaluation of Composite and Sheet Metal}, journal = {NDT Technology}, volume = {2}, number = {5}, pages = {3-13}, year = {2020}, publisher = {Iranian Society for Nondestructive Testing (IRNDT)}, issn = {2676-6655}, eissn = {2676-6655}, doi = {10.30494/jndt.2020.217113.1034}, abstract = {Defects and damage during the manufacture of composites or metal parts are inevitable. Therefore, non-destructive testing is essential to prevent failure and increase the reliability of composite structures or metal components. Non-destructive thermography technologies have shown many advantages in this regard. In the thermography technology, the temperature variation of the external surface of the work piece was determined by receiving the radiated infrared waves. These waves indicated the point temperature precisely. In this paper, a compelet and comprehensive study of non-destructive infrared thermgraphy test methods for metal and composite inspection, detailed analysis was performed and the developments of infrared therapeutic technologies were investigated. First, the basic concepts for non-destructive test theramography were introduced. Then different types of thermography with radiation stimulation are described and compared. In the following, research examples of the application of thermography methods and some of the strengths and limitations of thermography technologies were compared and described in detail.}, keywords = {non-destructive testing,Radiation stimulation,Infrared Thermography}, title_fa = {حرارت‌نگاری با تحریک تابشی در ارزیابی غیرمخرب پوسته های کامپوزیتی و فلزی}, abstract_fa = {نقصها و آسیبها در حین ساخت کامپوزیتها یا قطعات فلزی اجتناب ناپذیر است. بنابراین، آزمون غیرمخرب برای جلوگیری از شکست و افزایش قابلیت اطمینان ساختارهای کامپوزیتی یا اجزای سازنده فلزی بسیار ضروری است. فناوریهای غیرمخرب دمانگاری مزایای فراوانی در این زمینه را نشان داده اند. در این فناوری تغییرات دمای سطح با استفاده ازدریافت امواج فروسرخ ساطع شده از سطح قطعه کار انجام می پذیرد. این امواج با دقت بسیار بالا دمای هر نقطه از سطح را آشکار می نمایند. در این مقاله، بررسی کامل و جامعی از روش‌های آزمون غیرمخرب دمانگاری فروسرخ برای بازرسی فلزات و کامپوزیتها انجام شد و پیشرفتهای فناوری‌های دمانگاری فروسرخ مورد بررسی قرار گرفت. ابتدا مفاهیم پایه برای دمانگاری آزمون غیرمخرب معرفی شدند. سپس انواع روش‌های دمانگاری با تحریک تابشی شرح داده و مورد مقایسه قرار داده شدند. در ادامه نمونه‌های پژوهشی از کاربرد روش‌های دمانگاری و برخی از نقاط قوت و محدودیتهای فناوریهای دمانگاری با هم مقایسه شده و به تفصیل شرح داده شده است.}, keywords_fa = {آزمون غیرمخرب,تحریک تابشی,دمانگاری فروسرخ}, url = {https://www.jndttech.ir/article_105291.html}, eprint = {https://www.jndttech.ir/article_105291_54a99d93a36c0e39016d5bce07a1ae02.pdf} } @article { author = {mirzaahmadi, soheil and Akbari, Davood}, title = {A Review on Non-Destructive Identification of Defects in Fiber Reinforced Polymeric Base Composites}, journal = {NDT Technology}, volume = {2}, number = {5}, pages = {14-29}, year = {2020}, publisher = {Iranian Society for Nondestructive Testing (IRNDT)}, issn = {2676-6655}, eissn = {2676-6655}, doi = {10.30494/jndt.2020.207980.1026}, abstract = {In recent years, limitations such as the inability to inspect composite materials in common non-destructive testing methods (NDT) have led to the development of new methods such as optical thermography (OPT) and digital shearography (DISH) which are able to resolve these limitations with non-contact and full field inspection. The aim of this paper is to compare the new and traditional NDT methods and also to mention the main features of these new methods such as detection of the defects by stimulating the specimen and receiving its response as out-of-plane displacement derivative (strain) and temperature gradients. The results show that the loading conditions, type of inspected defects, shear amount and the studied material are effective parameters in DISH to accurately estimating the size and depth of defects and also can show that the phase difference between reflected waves for healthy and defective regions in OPT increases up to a specific and optimum frequency value. Moreover, phase difference of waves can be used to determine the defect depth. Additionally, due to the indirect and non-contacting nature of the new methods in measuring defects, the correct determination of the type, size, depth and position of defects is associated with a small percentage of errors. Finally, it is proved that infrared thermography is a quick and effective method for a pass-fail test. Sonic thermography is capable for semi-quantitative evaluation impact related defects and combination of both OPT and DISH methods demonstrated as applicable for full field inspection of composite components instead of traditional methods.}, keywords = {Fiber reinforced polymer composites,NDT,Digital shearography,Optical thermography,Sonic thermography}, title_fa = {مروری بر شناسایی غیرمخرب عیوب در مواد مرکب پایه پلیمری تقویت شده با الیاف}, abstract_fa = {محدودیت‌هایی نظیر عدم قابلیت بازرسی کامپوزیت‌ها در روش‌های معمول و سنتی آزمون غیرمخرب، سبب توسعه روش‌های نوینی چون روش حرارت نگاری و برشنگاری دیجیتالی در سالیان اخیر گشته که امکان بازرسی عیوب را بدون تماس با نمونه کامپوزیتی و بصورت تمام میدانی را میسر می‌سازد. در این مقاله روش‌های نوین به همراه روش های سنتی بدست آمده از مطالعات پیشین مورد بررسی قرار گرفته و به ویژگی اساسی روش‌های نوین در اندازه گیری غیر تماسی عیوب بصورت مشتق جابجایی خارج صفحه‌ای (کرنش) و گرادیان دمایی اشاره شده است. نتایج نشان دهنده این است که در روش برشنگاری شرایط و میزان بارگذاری، نوع عیب، اندازه برش و جنس ماده مورد بازرسی در تخمین اندازه و عمق عیب تاثیر دارند. همچنین در روش حرارت نگاری اختلاف فاز بین نواحی سالم و معیوب با افزایش فرکانس تحریک حرارتی تا حد معینی افزایش می‌یابد و از این آنالیز جهت تعیین بهینه فرکانس برای شناسایی عیوب استفاده می‌شود. از اختلاف فاز امواج می‌توان برای تعیین عمق عیوب استفاده نمود. علاوه بر این، بدلیل ماهیت غیر تماسی و غیر مستقیم روش‌های مذکور، اندازه گیری عیوب، تعیین صحیح نوع، اندازه، عمق و موقعیت عیوب همواره با درصدی خطا همراه بوده است. در نتیجه استفاده از روش سریع و موثر حرارت نگاری مادون قرمز در تعیین نتایج آزمون شکست نمونه‌ها و روش ترموگرافی سونیک جهت ارزیابی شبه کمی عیوب ناشی از ضربه و تلفیق دو روش حرارت نگاری مادون قرمز و برشنگاری جهت بازرسی جامع قطعات کامپوزیتی به جای روش های سنتی چون تست فراصوتی پیشنهاد شده است.}, keywords_fa = {کامپوزیت پایه پلیمری تقویت شده با الیاف,آزمون غیر مخرب,برشنگاری,حرارت نگاری,ترموگرافی سونیک}, url = {https://www.jndttech.ir/article_105286.html}, eprint = {https://www.jndttech.ir/article_105286_dbd65940abd7f3a924b4e1b7c305bc08.pdf} } @article { author = {Rostami, Hossein and حیدری, حسین and Saghafi, Hamed}, title = {Study of curved composites drilling behavior using time-domain acoustic signal analysis}, journal = {NDT Technology}, volume = {2}, number = {5}, pages = {30-37}, year = {2020}, publisher = {Iranian Society for Nondestructive Testing (IRNDT)}, issn = {2676-6655}, eissn = {2676-6655}, doi = {10.30494/jndt.2020.214768.1029}, abstract = {In recent years, the use of layered composites has become very common in various industries due to specifications and properties like high strength, high strength to weight ratio and high corrosion resistance. One of the methods to construct the composite structures is the mechanical joining. To create these kinds of joints, the composite piece should be drilled. This drilling process results in the damages like interlayer delamination. Among the various methods for damage monitoring in composites, the acoustic emission test has the capability to detect the damages in composite pieces under loading due to high sensitivity, high detectability and the capability for online monitoring of the sample. Until now, extensive studies have been performed to analyze the damages during the drilling process of the composites with flat and smooth geometries. On the other hand, the utilization of curved composites is more common in the industry. There have been a few types of research for drilling of these kinds of composite materials. In this research, by using acoustic emission during the drilling process, the machining force behavior and also, interlayer delamination has been analyzed. According to the results, it has been shown that, count feature in acoustic emission method can presents different damage mechanisms.}, keywords = {curved composites,Drilling,Acoustic Emission signals}, title_fa = {ساخت کامپوزیت های پایه پلیمری انحناداربه منظور تحلیل رفتار سوراخکاری با استفاده از تحلیل سیگنال های نشرآوایی در حوزه زمان}, abstract_fa = {در سال‌های اخیر، استفاده از کامپوزیت‌های لایه‌ای در صنایع مختلف به دلیل داشتن خواص و ویژگی‌هایی از قبیل استحکام بالا، نسبت استحکام به وزن زیاد، مقاومت زیاد در برابر خوردگی، بسیار رایج شده است. یکی از روشهای مونتاژ سازههای کامپوزیتی، روش اتصال مکانیکی می‌باشد. برای ایجاد این‌گونه از اتصالات، نیاز به ایجاد سوراخ در قطعه کامپوزیتی است. این روش سوراخ‌کاری باعث ایجاد آسیب‌هایی از قبیل جدایش بین لایه‌ای می‌گردد. در بین روش‌های مختلف پایش خرابی در کامپوزیت‌ها، نشر آوایی به دلیل حساسیت و قدرت تشخیص بالا و قابلیت پایش برخط قطعه، قابلیت تشخیص خرابی‌های به وجود آمده در قطعه کامپوزیتی در حین بارگذاری را دارد. تاکنون تحقیقات وسیعی به‌منظور تجزیه ‌و تحلیل آسیب‌های به وجود آمده در حین فرآیند سوراخ‌کاری کامپوزیت‌های با هندسه تخت و مسطح انجام ‌شده است. از سویی دیگر، استفاده از کامپوزیت‌ها با اشکال هندسی انحنادار، در صنعت بیشتر مورداستفاده قرار می‌گیرد. تحقیقات بسیار محدودی بر روی سوراخ‌کاری این‌گونه مواد کامپوزیتی ارائه‌شده است. در این پژوهش با به‌کارگیری سیگنال‌های نشر آوایی، در حین پروسه سوراخ‌کاری به تجزیه ‌و تحلیل رفتار نیروهای ماشین‌کاری و همچنین جدایش بین لایه‌ای پرداخته شده است. مطابق با نتایج مشخص گردید پارامتر کانت در روش نشر آوائی قادر به نمایش مکانیزم های مختلف شکست می باشد.}, keywords_fa = {کامپوزیت‌های انحنادار,سوراخ‌کاری,سیگنال انتشار فرا آوایی}, url = {https://www.jndttech.ir/article_105288.html}, eprint = {https://www.jndttech.ir/article_105288_9a33d38743f12784d0c349f304fc39b6.pdf} } @article { author = {Refahi Oskouei, Amir and Haidary, Hossein and Sadri, Mohsen}, title = {Improve the Quality of the Images Obtained by Magnetic Flux Leakage on Wire Ropes Using Wavelet Analysis}, journal = {NDT Technology}, volume = {2}, number = {5}, pages = {38-43}, year = {2020}, publisher = {Iranian Society for Nondestructive Testing (IRNDT)}, issn = {2676-6655}, eissn = {2676-6655}, doi = {10.30494/jndt.2020.205893.1025}, abstract = {Defects in wire rope steel cables can be mainly due to corrosion, loss of cross-sectional metallic area and breakage of steel wires. These defects reduce the allowable strength of rope and eventually failure of the steel cable due to the stresses caused by the combined loads. This study aimed to identify and detect artificial defects on wire rope by using magnetic flux leakage method. First, a number of specific artificial faults created, which included the failure of cable steel wires. Then, using magnetic flux leakage device, the magnetic signals caused by artificial defects were received by magnetic sensors embedded in the device, and then displayed as a color image after analysis. Since the resolution of the images obtained from the magnetic sensor signals is not very clear, the wavelet analysis method has been applied on raw signals to improve quality of the image. In wavlet analysis signal decomposed into different frequency levels and the threshold criterion is applied to reduce the background noise. Then, from the frequency levels, the signal that best describes the faulty content is choosen and used to reconstruct the image. The results show that using the wavelet analysis method improves image analysis capability as well as image quality of the defect.}, keywords = {Magnetic Flux Leakage,Steel Wire Rope,wavelet analysis}, title_fa = {بهبود کیفیت تصاویر بدست آمده از بازرسی نشتی شار مغناطیسی کابل‌ها با بهره‌گیری از تحلیل موجک}, abstract_fa = {عیوب در کابل های فولادی عمدتا بصورت عیب خوردگی، عیب کاهش سطح مقطع و گسیختگی مفتول های فولادی ممکن است ظاهر شود. وجود این عیوب باعث کاهش استحکام و در نهایت پارگی کابل فولادی در اثر تنش های حاصل از بارگذاری های ترکیبی می گردد. این تحقیق با هدف شناسایی و بارزسی عیوب مصنوعی سطحی ایجاد شده با بهره گیری از روش نشتی شار مغناطیسی انجام شده است. ابتدا چند عیب مصنوعی مشخص که شامل ایجاد گسیختگی بر روی مفتول های فولادی کابل بود، ایجاد گردید. سپس با استفاده از دستگاه نشتی شار مغناطیسی سیگنال های مغناطیسی ناشی از عیوب مصنوعی توسط سنسورهای مغناطیسی تعبیه شده در دستگاه، دریافت و بعد از تجزیه و تحلیل بصورت تصویر رنگی نمایش داده شد. از آنجاییکه وضوح تصاویر بدست آمده از سیگنال های سنسورهای مغناطیسی خیلی واضح نمی باشد لذا در کار حاضر سعی شده است که با استفاده از روش تحلیل موجک، سیگنال ها به سطوح مختلف فرکانسی تجزیه شده و با بکارگیری معیار حد آستانه برخی از نویزهای عملکردی دستگاه حذف گردد. سپس از بین سطوح فرکانسی، سیگنالی که دارای بهترین وضعیت از نظر محتوای عیب می باشد انتخاب و برای بازسازی تصویر مورد استفاده قرار می گیرد. نتایج نشان می دهد که استفاده از روش تحلیل موجک تصاویر حاصل از عیوب را تا حد بسیار بالایی بهبود داده و نویزهای ناخواسته حاصل از حرکت های نسبی بین دستگاه و کابل را تا حد خوبی توانسته شناسایی و حذف کند.}, keywords_fa = {نشتی شار مغناطیسی,کابل های فولادی,تحلیل موجک}, url = {https://www.jndttech.ir/article_105285.html}, eprint = {https://www.jndttech.ir/article_105285_f7284a66fc1c475d2268c5e0ce369dc4.pdf} } @article { author = {Abdollah-Pour, Hassan}, title = {Application of Electrochemical Impedance Spectroscopy (EIS) as an NDT method in Corrosion Monitoring and Analysis}, journal = {NDT Technology}, volume = {2}, number = {5}, pages = {44-59}, year = {2020}, publisher = {Iranian Society for Nondestructive Testing (IRNDT)}, issn = {2676-6655}, eissn = {2676-6655}, doi = {10.30494/jndt.2020.208338.1027}, abstract = {Electrochemical Impedance Spectroscopy (EIS) is a powerful method for investigating various electrochemical systems. The technic involves application of a small amplitude alternative current (AC) perturbation to the electrochemical system and recording its response, and therefore it is considered a non-destructive monitoring technic. This article describes the scientific fundamentals for the EIS method, instrumentation of the method, especially different electrode configurations (2 or 3 electrode systems and comb-shaped or interdigitated electrodes), and also various fields where corrosion monitoring and analysis has been carried out by EIS. These include: atmospheric corrosion, concrete corrosion, analysis of performance of surface films and coatings, study of inhibitors, high temperature corrosion and oxidation, corrosion in gas and oil industries, microbiologically influenced corrosion (MIC) and stress corrosion cracking (SCC). The most recently published literature has been surveyed and typical equivalent circuit models, capabilities of the EIS technic and limitations of the technic are highlighted for each application. This article is a free translation and re-composition of two chapters about IES from references [1] and [2].}, keywords = {Electrochemical Impedance Spectroscopy (EIS),Corrosion monitoring,Non-destructive evaluations}, title_fa = {کاربرد روش طیف‌سنجی امپدانس الکتروشیمیایی به عنوان یک روش غیرمخرب در پایش و تحلیل خوردگی}, abstract_fa = {طیف‌سنجی امپدانس الکتروشیمیایی (Electrochemical impedance spectroscopy-EIS) روشی کارامد و پرکاربرد در تعیین خصوصیات گستره وسیعی از سیستم‌های الکتروشیمیایی است. در این روش، یک سیگنال جریان متناوب با دامنه کوچک به یک سلول الکتروشیمیایی (سلول خوردگی) اعمال شده و پاسخ سیستم به آن بررسی می شود. به دلیل کوچک بودن این دامنه ولتاژ تحریک، روش EIS یک تکنیک غیر مخرب محسوب می‌شود. در این مقاله، ابتدا به معرفی مختصر اصول EIS پرداخته شده و در ادامه، به ویژگی‌های دستگاهوری، علی الخصوص، پیکربندی های مختلف الکترود اشاره و در آخر، کاربردهای گسترده EIS در مطالعات خوردگی معرفی شده اند. این کاربردهای شامل خوردگی اتمسفری، خوردگی بتن، بررسی عملکرد پوشش‌ها و لایه‌های سطحی، اثر ممانعت کننده‌ها، خوردگی دمابالا، خوردگی در صنعت نفت و گاز، خوردگی میکروبی (Microbiologically Influenced Corrosion-MIC) و خوردگی تنشی (Stress Corrosion Cracking-SCC) هستند. در هر کاربرد، علاوه بر بررسی قابلیت های EIS، مدل‌های مدار معادل مرسوم نیز توضیح داده ‌شده‌اند. در این گزارش همچنین به محدودیت‌های اعمال روش EIS در حوزه‌های مختلف نیز اشاره شده است.}, keywords_fa = {پایش خوردگی,طیف سنجی امپدانس الکتروشیمیایی,بررسی های غیر مخرب}, url = {https://www.jndttech.ir/article_105287.html}, eprint = {https://www.jndttech.ir/article_105287_323d9b2c3c07573afc625d28a0ef72ad.pdf} } @article { author = {jafari, ali and Hamzeloo, Seyed Reza}, title = {Investigating Damages of Drop Impact on Sandwich Panel Shell by Finite Element Method and Acoustic Emission}, journal = {NDT Technology}, volume = {2}, number = {5}, pages = {60-69}, year = {2020}, publisher = {Iranian Society for Nondestructive Testing (IRNDT)}, issn = {2676-6655}, eissn = {2676-6655}, doi = {10.30494/jndt.2020.216643.1033}, abstract = {Nowadays, polymer based sandwich panels are widely used in industry because of their excellent physical properties compared to metalic alloys, such as lightness, high strength to weight ratio, and so on. Different mechanisms of damage occur during mechanical loading of the composites. Accumulated defects eventually lead to the composite failure. Matrix cracking, fiber breakage, and delamination are some of the damage mechanisms caused by these types of structures. It is necessary to identify the contribution of each mechanism to the ultimate failure of the composites. Non-destructive monitoring of this type of structures and prediction of damage with simulation by finite element method is very important. In this paper, damage mechanisms under low impact impact for sandwich panel made of glass / polyester shell and polyurethane foam core was investigated. In the present study, the shell and core of the sandwich panel was made manually and the sandwich sample was affected by the impact of 20 Joule, and during the test, acoustic data was stored by the installed sensor and was analyzed. Also, the impact process modeled using Abaqus FE software with explicit dynamic solver and damage mechanisms investigated applying cohesive bonding between layers and the proposed finite element model. The results obtained from the empirical test and simulation were discussed and there is a good agreement observed between them.}, keywords = {finite element modeling,Composite,Delamination,Drop Test,Acoustic Emission}, title_fa = {بررسی آسیب‌های ناشی از ضربه سقوط آزاد در پوسته ساندویچ پانل با روش المان محدود و آزمون نشر آوایی}, abstract_fa = {امروزه کامپوزیت‌های پایه پلیمری و به‌خصوص ساندویچ پانلها به دلیل خواص فیزیکی مناسب در مقایسه با فلزات و آلیاژهای فلزی نظیر سبکی، نسبت استحکام به وزن بالا و..، کاربردهای زیادی در صنعت دارند. در طی بارگذاری مکانیکی کامپوزیت‌ها، آسیب‌های متنوع با مکانیزم‌های مختلف به وجود می‌آید. آسیب‌های انباشته درنهایت منجر به شکست کامپوزیت می‌شود. ترک‌خوردگی ماتریسی، شکست الیاف، لایه‌لایه‌شدن ازجمله آسیب‌های ایجادشده در این نوع از سازه‌ها می‌باشند. شناسایی سهم هرکدام از این مکانیزم‌ها در شکست نهایی کامپوزیت‌ها ضروری است. شناسایی محل، شدت و نوع آسیب ایجاد‌شده با بازرسی غیر مخرب بر روی این ساختار و همچنین پیش‌بینی شدت و نوع آسیب توسط نرم‌افزارهای المان محدود بسیار حائز اهمیت می‌باشند. در این مقاله مکانیزم‌های آسیب بر روی ساندویچ پانل از جنس پوسته شیشه/پلی‌استر و هسته فوم پلی اورتان تحت تاثیر ضربه سرعت‌پایین بررسی شده‌است. در پژوهش حاضر، پوسته و هسته ساندویچ پانل به‌صورت دستی ساخته‌شده و نمونه ساندویچی تحت تأثیر ضربه 20 ژول قرارگرفته است و در حین آزمون، داده های آکوستیکی توسط سنسور نصب شده ذخیره و تحلیل گشته‌است. و با توجه به سیگنال‌های دریافتی از آزمون نشر آوایی وجود آسیب‎‌های حاصل از ضربه تشخیص داده شد. همچنین با استفاده از نرم‌افزار آباکوس با حلگر دینامیکی صریح مکانیزم‌های آسیب‌های بین‌لایه‌ای و درون‌لایه‌ای با استفاده مدل المان محدود ارائه‌شده موردبررسی قرار گرفته‌است. نتایج به‌دست‌آمده از آزمون تجربی و شبیه‌سازی موردبحث قرار گرفته و تطابق مناسبی مابین آن‌ها برقرار مشاهده می‌گردد.}, keywords_fa = {شبیه‌سازی المان محدود,کامپوزیت,جدایش لایه‌ای,سقوط آزاد,آزمون نشرآوایی}, url = {https://www.jndttech.ir/article_105290.html}, eprint = {https://www.jndttech.ir/article_105290_9c6b89d54a4c5f1b67644a8706bf1067.pdf} } @article { author = {Azadi, Farid and Akbari, Davoud and ghasemi tamami, peyman}, title = {Application of Digital Image Correlation method for measurement of residual stress (A review)}, journal = {NDT Technology}, volume = {2}, number = {5}, pages = {70-82}, year = {2020}, publisher = {Iranian Society for Nondestructive Testing (IRNDT)}, issn = {2676-6655}, eissn = {2676-6655}, doi = {10.30494/jndt.2020.214839.1030}, abstract = {In this paper, the measurement of residual stress by the combination of Hole drilling, slitting and Digital Image Correlation methods and history of activities in this area have been investigated. To this end, the principles of the hole drilling, according to ASTM E837 and slitting methods have been discussed. Subsequently, the principles of digital image correlation and the methods used to calculate the correlation coefficient are investigated. To use the proposed method, related works done in recent years have been studied. For this purpose, related articles have been extracted and the main points for evaluation of residual stress using hole drilling and digital image correlation methods have been investigated. By reviewing past research done in the field of residual stress and examining the points made in the research, it has been determined that digital image correlation and central hole drilling methods can be used to measure the residual stresses in any industrial parts with high precision.}, keywords = {Digital Image Correlation,Residual Stress,Destructive and Non Destructive}, title_fa = {مروری بر کاربرد روش غیرمخرب برهمنگاری تصاویر دیجیتالی برای اندازه‎گیری تنش پسماند}, abstract_fa = {این مقاله به معرفی و بررسی اندازه‌گیری تنش پسماند با استفاده از روش سوراخکاری مرکزی، شیارزنی و روش غیرمخرب برهمنگاری تصاویر دیجیتالی و سابقه فعالیت‌های انجام شده در این حوزه می پردازد. به این منظور در ابتدا به بیان اصول روش سوراخکاری طبق استاندارد ASTM E837 و شیارزنی پرداخته شده است. پس از آن اصول روش برهمنگاری تصاویر دیجیتالی و روش‌های مورد نیاز برای محاسبه ضرایب همبستگی مورد بررسی قرار گرفته است. با هدف کاربردی‌سازی روش معرفی شده، کارهای مرتبط با آن که در سال‌های اخیر اجرا شده، مرور شده است. به این منظور مقالات و گزارش‌های مرتبط استخراج شده و نکات اصلی برای ارزیابی تنش پسماند با استفاده از روش سوراخکاری مرکزی، شیارزنی و برهمنگاری تصاویر دیجیتالی مورد بررسی قرار گرفته‌اند. با بررسی نکات بیان شده در پژوهش‌های صورت گرفته، مشخص شد که روش برهمنگاری تصاویر دیجیتالی و سوراخکاری مرکزی قابلیت اندازه‌گیری تنش پسماند را با دقت بالایی دارا هستند.}, keywords_fa = {برهمنگاری تصاویر دیجیتالی,تنش پسماند,مخرب,نیمه مخرب}, url = {https://www.jndttech.ir/article_105289.html}, eprint = {https://www.jndttech.ir/article_105289_873e7aad878580151affd51797155f87.pdf} } @article { author = {Jamshidi, Bahareh}, title = {The Role of Spectroscopy as an Optical Non-destructive Technology in Development of Smart Agriculture}, journal = {NDT Technology}, volume = {2}, number = {5}, pages = {83-92}, year = {2020}, publisher = {Iranian Society for Nondestructive Testing (IRNDT)}, issn = {2676-6655}, eissn = {2676-6655}, doi = {10.30494/jndt.2020.217468.1035}, abstract = {Optical Spectroscopy, as a powerful and applicable Non-destructive Testing (NDT) technology, is capable of solving many problems in agriculture based on quality, safety and health assessment of the sample (plant or crop, food, soil, water, etc.). This non-destructive optical technology can be used for development of smart spectral sensors and systems, the most important objects that can be connected to the Internet with the potential to collect, store, process and analyze the spectral data and information, and control or communicate remotely. Recent advances in non-destructive Spectroscopy technology in combination with emerging and advanced technologies such as Internet of Things (IoT), Big Data, Cloud Computing, and Artificial Intelligence technologies, play an important role in developing Smart Agriculture and improving the agricultural productivity. This article aims to present the role of this Non-destructive Testing technology in the future of Smart Agriculture by introducing its most important applications in solving key challenges facing agriculture based on sample quality, safety and health assessment.}, keywords = {Internet of Things,Spectroscopy,non-destructive testing,Smart Systems,Spectral Imaging,Spectral Sensors}, title_fa = {نقش طیف‌سنجی به عنوان یک فناوری غیرمخرب اپتیکی در توسعه کشاورزی هوشمند}, abstract_fa = {طیف سنجی نوری به عنوان یک فناوری آزمونِ غیرمخرب توانمند و کاربردی قادر به حل بسیاری از مسایل بخش کشاورزی مبتنی بر ارزیابی کیفیت، ایمنی و سلامت نمونه (گیاه یا محصول کشاورزی، مواد غذایی، خاک، آب و غیره) است. این فناوری اپتیکیِ غیرمخرب می تواند به منظور توسعه حسگرها و سامانه‌های طیفی هوشمند که از مهم‌ترین اشیاء قابل اتصال به اینترنت با توانایی جمع‌آوری، ذخیره، پردازش و تجزیه و تحلیل داده ها و اطلاعات طیفی، و کنترل یا ارتباط از راه دور هستند، استفاده شود. پیشرفت‌های اخیر فناوری غیرمخربِ طیف‌سنجی در تلفیق با فناوری‌های‌ نوظهور و پیشرفته از قبیل اینترنت اشیاء، کلان داده‌، رایانش ابری و هوش مصنوعی نقش موثری در توسعه کشاورزی هوشمند و بهبود بهره‌وری کشاورزی دارد. این مقاله سعی دارد، نقش این فناوری آزمون غیرمخرب را در آینده کشاورزی هوشمند با معرفی مهم‌ترین کاربردهای آن در حل چالش‌های کلیدی بخش کشاورزی مبتنی بر ارزیابی کیفیت، ایمنی و سلامت نمونه ارائه کند.}, keywords_fa = {آزمون‌ غیرمخرب,طیف‌سنجی,اینترنت اشیاء,تصویربرداری طیفی,حسگرهای طیفی,سامانه‌های هوشمند}, url = {https://www.jndttech.ir/article_105292.html}, eprint = {https://www.jndttech.ir/article_105292_200694805f8b1c3e4272348d4bc69a85.pdf} } @article { author = {}, title = {جلد و شناسنامه علمی نشریه}, journal = {NDT Technology}, volume = {2}, number = {5}, pages = {-}, year = {2020}, publisher = {Iranian Society for Nondestructive Testing (IRNDT)}, issn = {2676-6655}, eissn = {2676-6655}, doi = {}, abstract = {}, keywords = {}, title_fa = {جلد و شناسنامه علمی نشریه}, abstract_fa = {}, keywords_fa = {}, url = {https://www.jndttech.ir/article_119718.html}, eprint = {} }