@article { author = {Sazgar, Amjad and Amiri, Morteza and SoleymaniNatanzi, Mohammad}, title = {Article English Title for Nondestructive Testing Technology Journal Evaluation of X-Ray Radiography, Laser Shearography and I.R. Thermography in the defect detection of the Carbon Reinforced Polymer Composite Panels}, journal = {NDT Technology}, volume = {2}, number = {8}, pages = {78-85}, year = {2021}, publisher = {Iranian Society for Nondestructive Testing (IRNDT)}, issn = {2676-6655}, eissn = {2676-6655}, doi = {10.30494/jndt.2021.275937.1057}, abstract = {Carbon fiber reinforced polymers, or so-called CFRPs, are widely used in different industries due to their unique properties, such as high strength-to-weight ratio. A common example of application of this material are composite planels that are used in the construction of composite panels curved and flats surfaces. Despite the excellent properties of these materials, a variety kinds of defects such as fiber disbonding or matrix cracks, affect their final performance. Therefore, the development of non-destructive inspection methods to identify defects in the parts made of this materials is very important. In this paper, samples of carbon fiber composites have been tested by X-ray radiography method. The results have been compared with two new NDT methods of digital shearography and infrared thermography. The results show that thermography is more successful in detecting many internal defects than the traditional X-ray radiography and also shearography. The results also show that in the curved geometry, which is not possible to complete the radiography test due to a limitation of some X-ray sources, the thermography method presents very acceptable results. It is also possible in many cases to use shearography method in flat samples to identify some kinds of defects, more successfully.}, keywords = {Carbon Reinforced Composites,Digital shearography,Thermography,X-ray Radiography}, title_fa = {ارزیابی روش‌های نوین پرتونگاری، برشنگاری لیزری و حرارت‌نگاری فروسرخ در عیب‌یابی غیرمخرب پوسته‌های پلیمری تقویت شده با الیاف کربن}, abstract_fa = {پلیمرهای تقویت‌شده با الیاف کربن یا در اصطلاح کامپوزیت‌های الیاف کربن، از جمله موادی هستند که به دلیل ویژگی‌های منحصر به فرد ازجمله نسبت استحکام به وزن بسیار بالا، مورد توجه بسیاری از صنایع در ساخت قطعات مختلف می باشند. نمونه‌های بسیار رایج این ماده، ورق‌های کامپوزیتی با ضخامت میلی‌متری است که در ساخت برخی از انواع پنل‌ها و یا سطوح منحنی و لوله کاربرد دارد. با وجود ویژگی‌های ممتاز این مواد، انواع عیوب نظیر جدایش الیاف و یا شکست ماتریس، کارکرد نهایی آنها را تحت تأثیر قرار می‌دهد. از این رو، توسعه روش‌های بازرسی غیر مخرب برای شناسایی عیوب قطعات ساخته شده با الیاف کربن بسیار پراهمیت است. در این مقاله نمونه‌های ورق کامپوزیتی الیاف کربن با روش پرتونگاری آزمایش شده و نتایج آن با دو روش نوین برشنگاری دیجیتالی و حرارت‌نگاری فروسرخ مقایسه شده است. نتایج نشان دهندۀ موفقیت بالاتر روش حرارت نگاری در تشخیص بسیاری از عیوب داخلی و همچنین روش برشنگاری در تشخیص جدایش لایه‌ای در این نمونه‌ها نسبت به روش آزمون سنتی پرتونگاری است. همچنین، نتایج نشان می‌دهد در هندسۀ خمیده و لوله که به دلیل محدودیت دسترسی در روش پرتونگاری، امکان تکمیل آزمون‌ها وجود ندارد، روش حرارت‌نگاری نتایج بسیار قابل قبولی را ارایه می‌نماید. علاوه‌براین، می‌توان در بسیاری موارد از روش نوین برشنگاری در نمونه‌های تخت برای شناسایی عیوب جدایش به طور موفق‌تر استفاده نمود.}, keywords_fa = {کامپوزیت‌های الیاف کربن,پرتونگاری,حرارت‌نگاری فروسرخ,برشنگاری دیجیتالی}, url = {https://www.jndttech.ir/article_139968.html}, eprint = {https://www.jndttech.ir/article_139968_e36d959e113de044037b3c08ae9b35d6.pdf} }