@article { author = {Javahery, Mojtaba and Abbasi, Majid and Boutorabi, Seyed Mohammad Ali and Azizi, Nima}, title = {Non-Destructive Evaluation of High Chromium Cast Iron ‎Mill Balls with Eddy Current Test}, journal = {NDT Technology}, volume = {2}, number = {2}, pages = {49-57}, year = {2018}, publisher = {Iranian Society for Nondestructive Testing (IRNDT)}, issn = {2676-6655}, eissn = {2676-6655}, doi = {}, abstract = {In this paper, the eddy current nondestructive testing method was presented to evaluate the residual ‎austenite in the microstructure and hardness of high chromium cast iron mill balls. For this purpose, some ‎‎40 mm high alloy cast iron balls with 30 wt.% Cr and 3 wt.% C nominal composition were selected after ‎sand casting process. To achieve the different hardness and different residual austenite contents in the ‎microstructure, the balls were heat treated at different austenitzing and tempering temperatures. The ‎microstructural studies using by optical and scanning electron microscopies, XRD and Vickers hardness ‎were performed on the samples. Then, the microstructures of the samples were evaluated using an eddy ‎current device at 50 to 200 kHz frequencies. The result showed that, using the eddy current method, ‎different microstructures of the balls with different values of residual austenite and hardness can be ‎identified and separated, rapidly and nondestructively. To the purpose, the eddy current inspection at 150 ‎kHz frequency is selected using the impedance index as a non-destructive evaluation method. This index ‎decreases with increasing residual austenite content.‎}, keywords = {Non-Destructive Evaluation,Eddy current,High Chromium Cast Iron,Mill Balls,Residual Austenite}, title_fa = {ارزیابی غیرمخرب گلوله‌های آسیا چدن پرکروم توسط آزمون جریان گردابی}, abstract_fa = {در این تحقیق از آزمون غیرمخرب جریان گردابی برای ارزیابی میزان آستنیت باقیمانده در ریزساختار و سختی گلوله‌های آسیا ‏از جنس چدن پر کروم استفاده شد. به این منظور نمونه‌هایی از گلوله چدن آلیاژی با ترکیب اسمی 30 درصد وزنی کروم و 3 ‏درصد وزنی کربن و با قطر 40 میلیمتر پس از ریخته‌گری در ماسه انتخاب شدند. برای دستیابی به سختی و میزان آستنیت ‏باقیمانده متفاوت، گلوله‌ها تحت سیکل‌های متفاوت عملیات حرارتی شامل دماهای مختلف آستنیت‌زایی و برگشت قرار گرفتند. ‏مطالعات ریزساختاری توسط میکروسکوپ‌های نوری و الکترونی روبشی، ‏XRD‏ و سختی‌سنجی به روش ویکرز انجام شد. در ‏ادامه با استفاده از یک دستگاه جریان گردابی، ریزساختار گلوله‌ها در فرکانس‌های مختلف 50 تا ‏kHz‏ 200 مورد ارزیابی قرار ‏گرفتند. نتایج نشان داد که با استفاده از روش جریان گردابی می‌توان ریزساختارهای مختلف گلوله‌ها با مقادیر متفاوت از ‏آستنیت باقیمانده و سختی را به صورت غیرمخرب و سریع، شناسایی و تفکیک کرد. به این منظور، بازرسی جریان گردابی در ‏فرکانس ‏kHz‏ 150 با استفاده از شاخص امپدانس به عنوان روش ارزیابی غیرمخرب انتخاب شده است. این شاخص با افزایش ‏میزان آستنیت باقیمانده، کاهش می‌یابد.‏}, keywords_fa = {ارزیابی غیرمخرب,جریان گردابی,چدن پرکروم,گلوله‌های آسیا,آستنیت باقیمانده}, url = {https://www.jndttech.ir/article_66545.html}, eprint = {https://www.jndttech.ir/article_66545_21ad00fbd8c69a6698d47dab10bf3b7e.pdf} }