@article { author = {Asemani, Hamidreza and Haghighi, Abdalrahman and Rezghi Maleki, Hadi and Soltani, Nasser}, title = {Feasibility of digital image correlation for non-destructive evaluation}, journal = {NDT Technology}, volume = {2}, number = {7}, pages = {121-127}, year = {2021}, publisher = {Iranian Society for Nondestructive Testing (IRNDT)}, issn = {2676-6655}, eissn = {2676-6655}, doi = {10.30494/jndt.2021.277424.1066}, abstract = {Digital image correlation (DIC) is widely used as a tool to measure displacements and surface strains. The generation of speckle pattern in DIC technique has some limitations. In addition to spray paint, other techniques including laser speckle have also been proposed to generate speckle patterns. In previous studies, the use of DIC as a non-destructive technique has been limited to detect the surface cracks. In the current study, the feasibility of DIC for detection of subsurface defects was investigated. A laser beam was utilized to generate the DIC speckle pattern. The tensile load was applied to a polypropylene specimen containing an artificial subsurface defect. The DIC images were recorded and analyzed before and after loading the specimen. The results of surface displacement in the direction of tension and perpendicular to tension revealed the defect. To study further, the surface strains of the specimen were determined. In the obtained results, the strain concentration indicated the defect in the specimen. The approximate size and shape of the artificial defect are recognizable in the measured strain distribution.}, keywords = {Laser DIC,Speckle pattern,non-destructive testing,Subsurface defects}, title_fa = {بررسی قابلیت روش برهم‌نگاری لیزری به منظور بازرسی غیر مخرب}, abstract_fa = {روش برهم‌نگاری تصاویر دیجیتال به عنوان ابزاری برای ‌اندازه‌گیری جابجایی‌ها و کرنش‌های سطحی به طور گسترده مورد استقبال قرار گرفته است. ایجاد الگوی لکه‌ای در روش برهم‌نگاری تصاویر دیجیتال با محدودیت‌هایی همراه است. بنابراین برای ایجاد الگوی لکه‌ای علاوه بر استفاده از اسپری رنگ تکنیک‌های متعدد دیگری از جمله استفاده از نور لیزر نیز ارائه شده است. استفاده از روش برهم‌نگاری به عنوان تکنیک غیرمخرب برای آشکار سازی عیوب در تحقیقات پیشین محدود به ترک‌های سطحی بوده است. در این تحقیق سعی شده است قابلیت روش برهم‌نگاری در آشکار سازی عیوب زیر سطحی مورد بررسی قرار گیرد. برای ایجاد الگوی لکه‌ای مناسب برای برهم‌نگاری، در این تحقیق از نور لیزر استفاده شده است. در راستای این تحقیق یک نمونه پلی پروپیلنی با عیب مصنوعی زیر سطحی ساخته شد و با استفاده از دستگاه کشش تک محوره تحت بارگذاری قرار گرفت. تصاویر برهم‌نگاری قبل و بعد از بارگذاری نمونه، ثبت شده و مورد مطالعه قرار گرفتند. نتایج محاسبه شده برای جابجایی سطحی در راستای کشش و عمود بر آن با موفقیت وجود عیب را آشکار نمودند. در گام بعدی برای بررسی بیشتر کرنش‌های سطحی محاسبه شدند. تمرکز کرنش سطحی در نتایج بدست آمده، نشان دهنده وجود عیب در قطعه بود. ابعاد و شکل تقریبی عیب مصنوعی در توزیع کرنش‌ها در راستای اعمال کشش قابل تشخیص می‌باشد.}, keywords_fa = {برهم‌نگاری لیزری,الگوی لکه‌ای,بازرسی غیر مخرب,عیوب زیر سطحی}, url = {https://www.jndttech.ir/article_131198.html}, eprint = {https://www.jndttech.ir/article_131198_3826f3782899cc9839065eb28bedad01.pdf} }