@article { author = {Yaghootian, Amin and Valipour, Ali and Mokhtarizadeh, Armin}, title = {Detection of dimensions of axisymmetric surface defects located on the pipe using the first order symmetric torsional guided waves}, journal = {NDT Technology}, volume = {2}, number = {7}, pages = {51-59}, year = {2021}, publisher = {Iranian Society for Nondestructive Testing (IRNDT)}, issn = {2676-6655}, eissn = {2676-6655}, doi = {10.30494/jndt.2021.277451.1067}, abstract = {Nowadays, ultrasonic guided waves are widely used in non-destructive inspection of pipelines due to their high accuracy and speed. One of the advantages of using the symmetric modes of guided waves is simplicity in propagation and easier interpretation of the results. This has led to their significant use in the inspection of pipelines. Depending on the type of damage, defects can appear on the surface of pipe in different forms such as cracks, cavities, porosity, etc. In this paper, by using the propagation of the first-order torsional symmetric mode, symmetric defects in the different dimensions and sizes are investigated. The various factors such as the excitation frequency, the thickness of pipe and position of the defects are investigated to determine the effect of each on the reflection. Also, in this study, the reflection coefficients for the defects with different sizes have been calculated and their related diagrams have been drawn to use them for estimating the geometric dimensions of symmetrical defects. Finally, with the study of reflection coefficients, it is observed that the excitation frequency, the thickness of pipe and position of the defects can be considered as factors that affecting the reflected wave reflection.}, keywords = {Wave propagation,Non Destructive Testing (NDT),Reflection coefficient,Guided waves,Symmetric Defects}, title_fa = {تشخیص ابعاد هندسی عیوب متقارن سطحی لوله با بهره گرفتن از انتشار مود متقارن مرتبه اول پیچشی امواج هدایت‌ شده}, abstract_fa = {امروزه از امواج هدایت‌شده فراصوتی به دلیل دقت و سرعت بالا، در بازرسی غیر مخرب خطوط لوله استفاده‌ی زیادی می‌گردد. سادگی در انتشار و تفسیر راحت‌تر نتایج ازجمله مزایای مودهای متقارن امواج هدایت‌شده می‌باشد که سبب استفاده‌ی چشم‌گیر آن‌ها در بازرسی خطوط لوله شده است. با توجه به نوع آسیب، عیوب می‌توانند به شکل‌های مختلفی چون شکاف، حفره، تخلخل و غیره بر سطوح لوله پدیدار گردند. در این مقاله با بهره گرفتن از انتشار مود متقارن مرتبه اول پیچشی، ابتدا عیوب متقارن در ابعاد و اندازه‌های مختلف بررسی می‌شود. سپس عوامل مختلفی چون فرکانس تحریک، ضخامت لوله و موقعیت عیوب بررسی شده تا تأثیر هر یک بر بازتاب مود مذکور مشخص گردد. در این بررسی، ضرایب بازتاب برای عیوب با اندازه‌های مختلف محاسبه و نمودار‌های مربوط به آن‌ها ترسیم شده است تا از آن‌ها برای تخمین ابعاد هندسی عیوب متقارن بهره گرفته شود. درنهایت، با بررسی‌های مربوط به ضرایب بازتاب، مشاهده می‌گردد که فرکانس تحریک، ضخامت لوله و موقعیت عیوب ازجمله عوامل تأثیرگذار بر بازتاب موج هدایت‌شده می‌باشند.}, keywords_fa = {انتشار موج,آزمون‌های غیر مخرب,ضریب بازتاب,امواج هدایت‌شده,عیوب متقارن}, url = {https://www.jndttech.ir/article_131200.html}, eprint = {https://www.jndttech.ir/article_131200_8becd15e86d81a53e77e625a8697df2c.pdf} }