David C. Copley, Jeffrey W. Eberhard, Gregory A. Mohr, Computed Tomography Part I: Introduction and Industrial Application, The Journal of The Minerals, Metals & Materials Society (JOM), 46, pages14–26(1994)
[2] Z. Rumboldt, W. Huda, J.W. All, Review of Portable CT with Assessment of a Dedicated Head CT Scanner, AJNR ,Am J Neuroradiol, 2009 Oct;30(9):1630-6. doi: 10.3174/ajnr. A1603.
[3] M.S. Rapaport and A. Gayer, Application of gamma ray computed tomography to nondestructive testing, NDT&E International Volume 24 Number 3 June 1991
[4] Kogure Jin, Kawamura Hiromi, Onoe Morio, Tsao J.W., Yamada Hiroaki, Rot detection of wood poles by means of a portable x-ray computed tomographic scanner, Reference Number, International Nuclear Information System, No. 15059107, INIS Volume 15, INIS Issue 19, 1983
[5] Onoe, M.; Tsao, J.W.; Yamada, H.; Nakamura, H.; Kogure, J.; Kawamura, H.; Isono, E.; Maeda, Y, Matsumoto, Portable CT scanners for use on live trees and standing columns, p. 680-687, 11th world conference on nondestructive testing; Las Vegas, NV (USA, 1985
[6] Sung-Hee Jung, Jong-bum Kim Jinho Moon, PORTABLE INDUSTRIAL LIMITED ANGLE GAMMA-RAY TOMOGRAPHY SCANNING SYSTEM, USPATENT, US 9,057,680 B2 2015
[7] Bayu Azmi, Wibisono, Adhi Harmoko Saputro, Portable Gamma Ray Tomography System for Investigation of Geothermal Power Plant Pipe Scaling, 2017 15th Intl. Conf. QiR: Intl. Symp. Elec. and Com. Eng, 978-602-50431-1-6/17/$31.00 ©2017 IEEE
[8] Laurence Schimleck, Joseph Dahlen, Luis A. Apiolaza, Geo Downes, Grant Emms, Robert Evans, John Moore, Luc Pâques, Jan Van den Bulcke and Xiping Wang, Non-Destructive Evaluation Techniques and What They Tell Us about Wood Property Variation, Forests 2019, 10, 728; doi:10.3390/f10090728
[9] Moez Eltayeb, Sayed M. kbashi, Amar Osman, Suliman Abdalla, Mustafa. A. W. The Design of Portable Gamma Computed Tomography Scanner System, International Conference on Computing, Control, Networking, Electronics and Embedded Systems Engineering, IEEE, 2015
[10] http://www.canti.vn/en, Centre For Applications of Nuclear Technique in Industry.
[11] Ehsan Samei, Norbert J. Pelc, Computed Tomography: Approaches, Applications, and Operations, Springer International Publishing, 2020 /doi.org/10.1007/978-3-030-26957-9
[12] Jerry L. Prince, Jonathan Links, Medical Imaging Signals and Systems, 2nd Edition, PRENTICE HALL, 2015
[13] Alireza Haghighat, Monte Carlo Methods for Particle Transport, CRC Press, 1st ed., 2014
[14] Mohammad Reza Ay, Habib Zaidi, Development and validation of MCNP4C-based Monte Carlo simulator for fan- and cone-beam x-ray CT, Phys Med Biol 2005 Oct 21;50(20):4863-85. doi: 10.1088/0031-9155/50/20/009
[15] Mojtaba Askari, Ali Taheri, Majid Mojtahedzadeh larijani, Amir Movafeghi, Industrial gamma computed tomography using high aspect ratio scintillator detectors (A Geant4 simulation) Nuclear Inst. and Methods in Physics Research, A 923 (2019) 109–117
[16] A.F. Velo, M.M. Hamada, D.V.S. Carvalho, J.F.T. Martins, C.H. Mesquita, A portable tomography system with seventy detectors and five gamma-ray sources in fan beam geometry simulated by Monte Carlo method, Flow Measurement and Instrumentation 53 (2017) 89–94
[17] Jongbum Kim, Sunghee Jung, Jinho Moon, Gyuseong Cho, A feasibility study on gamma-ray tomography by Monte Carlo simulation for development of portable tomographic system, Applied Radiation and Isotopes70(2012)404–414
[18] A.F. Velo, A.G. Alvarez, D.V.S. Carvalho, V. Fernandez, S. Somessari, F.F. Sprenger, M.M Hamada, C.H. Mesquita, A Third Generation Tomography System with Fifteen Detectors Simulated by Monte Carlo Method, BRAZILIAN JOURNAL OF RADIATION SCIENCES, 07-02A (2019) 01-13
[19] Hughes H G 1997 Status of electron transport in MCNP Los Alamos National Laboratory LA-UR-97-1368 (Los Alamos, NM)
[20] INDUSTRIAL PROCESS GAMMA TOMOGRAPHY, IAEA, VIENNA, IAEA-TECDOC-1589, 2008
[21] A. Ferrari, P.R. Sala, A. Fasso`, and J. Ranft, "FLUKA: a multi-particle transport code" CERN-2005-10 (2005), INFN/TC_05/11, SLAC-R-773.
