[1] Suckow T., Schroeder J., & Groche P. (2021). Roll Forming of a High Strength AA7075 Aluminum Tube. Production Engineering Journal, 15(3), 573–586.
[2] Zhang W., Li H., Hu Z., & Hua L. (2020). Investigation on the Deformation Behavior and Post-Formed Microstructure/Properties of AA7075-T6 Alloy under Pre-Hardened Hot Forming Process, Material Science Engineering A Journal, 792(January), 139749.
[3] Dhanaraj P. S. & Rathinasuriyan C. (2022). Optimization of Fiber Laser Welding Parameters for High Strength Aluminium Alloy AA7075-T6. Materials Today : Proceedings Journal, 52(3),283-289.
[4] Henry Holroyd N.J. & Scamans G.M. (2013), Stress Corrosion Cracking in Al-Zn-Mg-Cu Aluminum Alloys in Saline Environments. Metallurgical And Materials Transactions A, 44a( March),1231.
[5] Euesden R.T., Aboura Y., Garner A.J., Jailin T., Grant C., Barrett Z., Engel C., Shanthraj P. , Holroyd N.J.H., Prangnell P.B., & Burnett T.L. (2023).In-Situ Observation of Environmentally Assisted Crack Initiation and Short Crack Growth Behavior of New-Generation 7xxx Series Alloys in Humid Air. Corrosin Science Journal, 216(2023), 11123.
[6] Prabhuraj P., Rajakumar S., Lakshminarayanan A. K., & Balasubramanian V. (2017), Evaluating Stress Corrosion Cracking Behaviour of High Strength AA7075-T651 Aluminium Alloy. Mechanical Behavior Material Journal, 26(3–4), 105–112.
[7] Leinonen H., Schildt T., & Hänninen H. (2011). Stress Corrosion Cracking-Crevice Interaction in Austenitic Stainless Steels Characterized by Acoustic Emission. Metallurgical and Materials Transactions A Journal. 42(2), 424–433.
[8] Lim J.K., Chung D.S., & Chung S.H. (1993). Evaluation of SCC Susceptibility of Weld HAZ in Structural Steel (I) - Material Properties and Strain Rate. Journal of korean Welding Society, 11(3), 48–60.
[9] Mazille H., Rothea R., & Tronel C. (1995). An Acoustic Emission Technique for Monitoring Pitting Corrosion of Austenitic Stainless Steels. Corrosin Science Journal, 37(9), 1365–1375.
[10] Umamaheshwer Rao A. C., Vasu V., Govindaraju M., & Sai Srinadh K. V. (2016). Stress Corrosion Cracking Behaviour of 7xxx Aluminum Alloys : A Literature Review. Transactions Nonferrous Metals Society of China Journal, 26(6), 1447–1471.
[11] Zhang Z., Zhang Z., Tan J., Wu X. (2019). Quantitatively Related Acoustic Emission Signal With Stress Corrosion Crack Growth Rate of Sensitized 304 Stainless Steel in High-Temperature Water. Corrosion Science Journal, 157 (January), 79-86.
[12] Zhang Z., Wu X., & Tan J. (2019). In-Situ Monitoring of Stress Corrosion Cracking of 304 Stainless Steel in High-Temperature Water by Analyzing Acoustic Emission Waveform, Corrosion Science Journal, 146(July), 90–98.
[13] Hwang W., Bae S., Kim J., Kang S., Kwag N., & Lee B. (2015). Acoustic Emission Characteristics of Stress Corrosion Cracks in a Type 304 Stainless Steel Tube. Nuclear and Engineering Technology Journal, 47( 4), 454–460.
[14] Li B. & Yue X. (2016). Characterization of Intergranular Stress Corrosion Cracking of 304 Stainless Steel by Electrochemical Noise and Acoustic Emission Techniques. International Journal of Electrochemical Science, 11(1), 1–13.
[15] Kovač J., Legat A., Zajec B., Kosec T., & Govekar E. (2015). Detection and Characterization of Stainless Steel SCC by the Analysis of Crack Related Acoustic Emission. Ultrasonics Journal, 62(1), 312–322.
[16] Ruspini E. H., Bezdek J. C., & Keller J. M. (2019) Fuzzy Clustering : A Historical Prespective, IEEE Computinal Intelligence Magazing, 14(February), 45–55.
[17] ASTM E399-12 (2012). Standard Test Method for Linear-Elastic Elane-Strain Fracture Foughness KIC of Metallic Materials. ASTM International Standard.