NDT Technology

Author Index

A

Abbasi, Majid Non-Destructive Evaluation of High Chromium Cast Iron ‎Mill Balls with Eddy Current Test [Volume 2, Issue 2, 2018, Pages 49-57]
Abbasi, Majid Metallurgical Quality Control of Aged 7075 Al Alloy Using Eddy Current Nondestructive Testing Method [Volume 2, Issue 6, 2020, Pages 26-35]
Abbasi, Majid Nondestructive Evaluation of Reformer Tubes in Direct Reduction of Iron Unit by Eddy Current Test Method [Volume 2, Issue 7, 2021, Pages 33-43]
Abdollahi, Javad Comparison of two methods of digital radiography in the pipe industry [Volume 2, Issue 1, 2017, Pages 47-54]
Abdollah-Pour, Hassan Application of Electrochemical Impedance Spectroscopy (EIS) as an NDT method in Corrosion Monitoring and Analysis [Volume 2, Issue 5, 2020, Pages 44-59]
Aboonajmi, Mohammad Diagnostic Ultrasound, a non-destructive approach for quality evaluation of Agro-food products [Volume 2, Issue 3, 2019, Pages 32-41]
Aboonajmi, Mohammad Nondestructive Quality Assessment of Extra Virgin Olive Oil by Ultrasound [Volume 2, Issue 6, 2020, Pages 62-71]
Aboonajmi, Mohammad Nondestructive apple quality assessment using acoustic-vibrational response and artificial neural network [Volume 2, Issue 9, 2022, Pages 98-106]
Afarideh, Hossein Projection Data Acquisition in Industrial Fan-Beam Computed Tomography Using Monte Carlo Modeling in Gas and Oil Pipelines Non-destructive testing [Volume 2, Issue 7, 2021, Pages 88-95]
Aghaeian, Setareh Investigation in common defects in investment casting by industrial X-ray radiography in the oil and gas industry [Volume 2, Issue 8, 2021, Pages 18-26]
Ahadi Akhlaghi, Iman Application of nondestructive magnetic flux leakage method in characterization of mechanical properties of API X65 steel [Volume 2, Issue 7, 2021, Pages 114-120]
Ahadi Akhlaghi, Iman Design and fabrication of a non-destructive system for detecting and measuring cracks in RDD-S11 rail defect detector equipment [Volume 2, Issue 9, 2022, Pages 41-51]
Ahadi Akhlaghi, Iman Non-destructive determination of side and vertical wear at the surface of railways [Volume 2, Issue 9, 2022, Pages 88-97]
Akbari, Davood Non-destructive residual stress measurement using digital image correlation method [Volume 2, Issue 3, 2019, Pages 50-58]
Akbari, Davood A Review on Non-Destructive Identification of Defects in Fiber Reinforced Polymeric Base Composites [Volume 2, Issue 5, 2020, Pages 14-29]
Akbari, Davood Nondestructive Evaluation of Gas Turbine Blade Cooling Holes Blockage by Thermography [Volume 2, Issue 6, 2020, Pages 46-52]
Akbari, Davood Capability of Digital Shearography in Crack Defect Inspection [Volume 2, Issue 8, 2021, Pages 41-61]
Akbari, Davood Application of Active IR Thermography in Defect detection of FDM printed parts with different infill percentage [Volume 2, Issue 9, 2022, Pages 2-12]
Akbari, Davoud Application of Digital Image Correlation method for measurement of residual stress (A review) [Volume 2, Issue 5, 2020, Pages 70-82]
Akhlaghi Modiri, Farzad Application of nondestructive magnetic flux leakage method in characterization of mechanical properties of API X65 steel [Volume 2, Issue 7, 2021, Pages 114-120]
Akhlaghi Modiri, Farzad Design and fabrication of a non-destructive system for detecting and measuring cracks in RDD-S11 rail defect detector equipment [Volume 2, Issue 9, 2022, Pages 41-51]
Akhlaghi Modiri, Farzad Non-destructive determination of side and vertical wear at the surface of railways [Volume 2, Issue 9, 2022, Pages 88-97]
Amiri, Morteza Application of the laser shearography in the non-destructive evaluation of the defects in the flat and curved surfaces made of carbon fiber composites [Volume 2, Issue 7, 2021, Pages 14-23]
Amiri, Morteza Article English Title for Nondestructive Testing Technology Journal Evaluation of X-Ray Radiography, Laser Shearography and I.R. Thermography in the defect detection of the Carbon Reinforced Polymer Composite Panels [Volume 2, Issue 8, 2021, Pages 78-85]
Araghian, Nafise Implementation of the neutron computed tomography by means of Filtered-back Projection algorithm in Tehran Research Reactor [Volume 2, Issue 9, 2022, Pages 129-139]
Ardebili, Amirreza Thermography with Radiation Excitation for Non-Destructive Evaluation of Composite and Sheet Metal [Volume 2, Issue 5, 2020, Pages 3-13]
Asemani, Hamidreza Feasibility of digital image correlation for non-destructive evaluation [Volume 2, Issue 7, 2021, Pages 121-127]
Asemani, Hamidreza Investigating the possibility of crack detection using digital image correlation with laser speckles [Volume 2, Issue 8, 2021, Pages 2-7]
Asghari, Saeed Using of Modulated Thermography for Nondestructive Testing of Polymer Plates [Volume 2, Issue 4, 2019, Pages 38-45]
Asghari, Saeed Thermography with Radiation Excitation for Non-Destructive Evaluation of Composite and Sheet Metal [Volume 2, Issue 5, 2020, Pages 3-13]
Askari, Mojtaba Feasibility Study of Tomography using Cargo Scanner System by Modeling and Experimental Methods [Volume 2, Issue 9, 2022, Pages 77-87]
Ayar, Pooyan A review on road structural health monitoring novel methods inside the pavement [Volume 2, Issue 8, 2021, Pages 86-104]
Azadi, Farid Non-destructive residual stress measurement using digital image correlation method [Volume 2, Issue 3, 2019, Pages 50-58]
Azadi, Farid Application of Digital Image Correlation method for measurement of residual stress (A review) [Volume 2, Issue 5, 2020, Pages 70-82]
Azizi, Nima Non-Destructive Evaluation of High Chromium Cast Iron ‎Mill Balls with Eddy Current Test [Volume 2, Issue 2, 2018, Pages 49-57]
Azizzadeh, Turaj A Review on Inspection Methods of Pipelines [Volume 2, Issue 4, 2019, Pages 9-20]

B

Babaei, Mohammad Reza Investigation in common defects in investment casting by industrial X-ray radiography in the oil and gas industry [Volume 2, Issue 8, 2021, Pages 18-26]
Babakhani, Asad A Method for Full Testing Coverage of the Ends of Parts and Pipes in AUT [Volume 2, Issue 2, 2018, Pages 38-41]
Babaki, Ghasem Comparison of two methods of digital radiography in the pipe industry [Volume 2, Issue 1, 2017, Pages 47-54]
Bahadory, Alireza Case depth measurement of steel components by contact ultrasonic backscattering technique [Volume 2, Issue 9, 2022, Pages 69-76]
Bakhtiari Ramezani, Mahdieh Evaluation of Plasma gliding-arc discharges electrode defects by positron annihilation life-time spectroscopy [Volume 2, Issue 7, 2021, Pages 96-103]
Baradaran, Samaneh Study the most important causes of abnormal radiation in industrial radiography [Volume 2, Issue 1, 2017, Pages 43-46]
Baradaran, Samaneh A Method for Full Testing Coverage of the Ends of Parts and Pipes in AUT [Volume 2, Issue 2, 2018, Pages 38-41]
Bayat Kazazi, Mahdi Case depth measurement of steel components by contact ultrasonic backscattering technique [Volume 2, Issue 9, 2022, Pages 69-76]
Behravesh, Amir Hossein Application of Active IR Thermography in Defect detection of FDM printed parts with different infill percentage [Volume 2, Issue 9, 2022, Pages 2-12]
Beigzadeh, AmirMohammad Feasibility Study of Tomography using Cargo Scanner System by Modeling and Experimental Methods [Volume 2, Issue 9, 2022, Pages 77-87]
Bekrani, Mahdi Implementation of an Imaging System Using Ultrasonic Phased Array [Volume 2, Issue 3, 2019, Pages 23-31]
Biganeh, Ali Evaluation of Plasma gliding-arc discharges electrode defects by positron annihilation life-time spectroscopy [Volume 2, Issue 7, 2021, Pages 96-103]
Bijhani, Arezo Nondestructive measurement of apple's pomace [Volume 2, Issue 1, 2017, Pages 35-42]
Boroomand, Mohammad Reza Experimental Study and leak investigation of Composite Pressure Vessel By Acoustic Emission Method [Volume 2, Issue 9, 2022, Pages 13-32]
Boutorabi, Seyed Mohammad Ali Non-Destructive Evaluation of High Chromium Cast Iron ‎Mill Balls with Eddy Current Test [Volume 2, Issue 2, 2018, Pages 49-57]

F

Farahani, Mohammadreza Using of Modulated Thermography for Nondestructive Testing of Polymer Plates [Volume 2, Issue 4, 2019, Pages 38-45]
Farahani, Mohammadreza Thermography with Radiation Excitation for Non-Destructive Evaluation of Composite and Sheet Metal [Volume 2, Issue 5, 2020, Pages 3-13]
Farahani, Mohammadreza Implementing Thermal Image Processing Techniques for Enhancing the Detectability of Defects in Thermography of Additive Manufacturing Components [Volume 2, Issue 6, 2020, Pages 36-45]
Farahani, Mohammadreza Nondestructive Evaluation of Gas Turbine Blade Cooling Holes Blockage by Thermography [Volume 2, Issue 6, 2020, Pages 46-52]
Farahani, Mohammadreza Thermal signal reconstruction and employment of K clustering method for inspection of additive manufactured polymer parts [Volume 2, Issue 7, 2021, Pages 60-69]
Faraji kalajahi, Pouya Application of Active IR Thermography in Defect detection of FDM printed parts with different infill percentage [Volume 2, Issue 9, 2022, Pages 2-12]
Farazmahdi, Mojtaba Implementation of the neutron computed tomography by means of Filtered-back Projection algorithm in Tehran Research Reactor [Volume 2, Issue 9, 2022, Pages 129-139]
Fatahi, Laleh Implementation of neural networks for prediction of location and orientation of pipe defects in guided wave ultrasonic testing [Volume 2, Issue 8, 2021, Pages 8-17]
Fathizadeh, Zahed Nondestructive apple quality assessment using acoustic-vibrational response and artificial neural network [Volume 2, Issue 9, 2022, Pages 98-106]
Fotovat Eskandari, Fatemeh Inspection of metallic samples defects in nondestructive testing by laser shearography with thermal loading [Volume 2, Issue 2, 2018, Pages 19-25]

H

Haghighi, Abdalrahman Feasibility of digital image correlation for non-destructive evaluation [Volume 2, Issue 7, 2021, Pages 121-127]
Haghighi, Abdalrahman Investigating the possibility of crack detection using digital image correlation with laser speckles [Volume 2, Issue 8, 2021, Pages 2-7]
Haidary, Hossein Improve the Quality of the Images Obtained by Magnetic Flux Leakage on Wire Ropes Using Wavelet Analysis [Volume 2, Issue 5, 2020, Pages 38-43]
Hallajan, Mehdi Inspection of metallic samples defects in nondestructive testing by laser shearography with thermal loading [Volume 2, Issue 2, 2018, Pages 19-25]
Hamidi, Emad Development of a Measurement System for Nondestructive Determination of Dielectric Constant and Magnetic Permeability of Materials, Using an Enhanced Microwave Chamber Disturbance Method [Volume 2, Issue 9, 2022, Pages 107-114]
Hamiyati Vaghef, Vahid Implementation of an Imaging System Using Ultrasonic Phased Array [Volume 2, Issue 3, 2019, Pages 23-31]
Hamzeloo, Seyed Reza Investigating Damages of Drop Impact on Sandwich Panel Shell by Finite Element Method and Acoustic Emission [Volume 2, Issue 5, 2020, Pages 60-69]
Hasanbeigi, Seyyed reza Nondestructive apple quality assessment using acoustic-vibrational response and artificial neural network [Volume 2, Issue 9, 2022, Pages 98-106]
Hasani, Mohamad Application of Active IR Thermography in Defect detection of FDM printed parts with different infill percentage [Volume 2, Issue 9, 2022, Pages 2-12]
Hazrati, Mansor Experimental Study and leak investigation of Composite Pressure Vessel By Acoustic Emission Method [Volume 2, Issue 9, 2022, Pages 13-32]
Heidari, Teymour Detection and Sizing of Fatigue Cracks in Metallic Structures from Eddy Current Probe Signals [Volume 2, Issue 2, 2018, Pages 42-48]
Heidari-Rarani, Mohammad Implementing Thermal Image Processing Techniques for Enhancing the Detectability of Defects in Thermography of Additive Manufacturing Components [Volume 2, Issue 6, 2020, Pages 36-45]
Heidari-Rarani, Mohammad Thermal signal reconstruction and employment of K clustering method for inspection of additive manufactured polymer parts [Volume 2, Issue 7, 2021, Pages 60-69]
Heidary, Hossein Experimental Study and leak investigation of Composite Pressure Vessel By Acoustic Emission Method [Volume 2, Issue 9, 2022, Pages 13-32]
Honarvar, Farhang Estimation of uncertainty in measurement of ultrasonic wave attenuation [Volume 2, Issue 7, 2021, Pages 128-133]
Honarvar, Farhang Case depth measurement of steel components by contact ultrasonic backscattering technique [Volume 2, Issue 9, 2022, Pages 69-76]
Hosseini, Seyed Amir Metallurgical Quality Control of Aged 7075 Al Alloy Using Eddy Current Nondestructive Testing Method [Volume 2, Issue 6, 2020, Pages 26-35]
Hosseini Pooya, Seyed Mahdi Effectiveness of Interventional Actions in Reduction of Unusual Exposure in Industrial Radiography in Iran [Volume 2, Issue 4, 2019, Pages 32-37]
Hosseinipour, Seyed Jamal Nondestructive Evaluation of Reformer Tubes in Direct Reduction of Iron Unit by Eddy Current Test Method [Volume 2, Issue 7, 2021, Pages 33-43]
Hosseini Poya, Seyyed Mehdi Study the most important causes of abnormal radiation in industrial radiography [Volume 2, Issue 1, 2017, Pages 43-46]
Hossein Zadeh Khezri, Ehsan Effect of Orders of Scattering in Linear Grating of Fibrous Reinforced Composites Using Resonance Ultrasonic Spectroscopy [Volume 2, Issue 8, 2021, Pages 69-77]

K

Kabir, Mostafa Projection Data Acquisition in Industrial Fan-Beam Computed Tomography Using Monte Carlo Modeling in Gas and Oil Pipelines Non-destructive testing [Volume 2, Issue 7, 2021, Pages 88-95]
Kahrobaee, Saeed Application of nondestructive magnetic flux leakage method in characterization of mechanical properties of API X65 steel [Volume 2, Issue 7, 2021, Pages 114-120]
Kahrobaee, Saeed Design and fabrication of a non-destructive system for detecting and measuring cracks in RDD-S11 rail defect detector equipment [Volume 2, Issue 9, 2022, Pages 41-51]
Kahrobaee, Saeed Non-destructive determination of side and vertical wear at the surface of railways [Volume 2, Issue 9, 2022, Pages 88-97]
Kalaki, Ali Periodic Inspection Challenges of steel CNG vessels and possible defects [Volume 2, Issue 2, 2018, Pages 26-31]
Kalateh Mollaei, Ali Investigation in common defects in investment casting by industrial X-ray radiography in the oil and gas industry [Volume 2, Issue 8, 2021, Pages 18-26]
Kazerooni, Morteza Development of a Measurement System for Nondestructive Determination of Dielectric Constant and Magnetic Permeability of Materials, Using an Enhanced Microwave Chamber Disturbance Method [Volume 2, Issue 9, 2022, Pages 107-114]
Kehtari, Mehrdad Systems for verifying the competence of staff for non-destructive testing [Volume 2, Issue 1, 2017, Pages 3-6]
Khabbazi Alavi, Mohammad A review on road structural health monitoring novel methods inside the pavement [Volume 2, Issue 8, 2021, Pages 86-104]
Khorasani Fardevani, Mohammad Esmaeil The Electronic Nose Technique for Non-Destructive clustering of Basil as a Medicinal Plant [Volume 2, Issue 4, 2019, Pages 54-60]
Khoshkbary, Reza Using of Modulated Thermography for Nondestructive Testing of Polymer Plates [Volume 2, Issue 4, 2019, Pages 38-45]
Kiani, Sajad Discriminability Assessment of MOS Sensors to Develop a Portable Electronic Nose System for Non-Destructive Quality Assessment of Medicinal Plants [Volume 2, Issue 9, 2022, Pages 115-128]
Kolagar, Ali Mohammad Nondestructive Evaluation of Gas Turbine Blade Cooling Holes Blockage by Thermography [Volume 2, Issue 6, 2020, Pages 46-52]
Koosheh saba, Mahmood Nondestructive measurement of apple's pomace [Volume 2, Issue 1, 2017, Pages 35-42]

M

Maddah Alghalandis, Behzad Numerical modeling of local residual stress detection in thin plates using the fundamental antisymmetric mode of ultrasonic Lamb waves [Volume 2, Issue 7, 2021, Pages 70-78]
Madrid García, José Antonio Comparison of radiography testing and ultraviolet inspection in identifying hidden designs and defects of exquisite paintings [Volume 2, Issue 7, 2021, Pages 79-87]
Madrid García, Jose A. A study of internal structure of two antique handguns by means of radiographic inspection [Volume 2, Issue 9, 2022, Pages 63-68]
Maghsoudi, Amid Appropriate Feature Selection for Creating Health Index in Rotary Machines Utilizing the Prognostic Health Management System [Volume 2, Issue 6, 2020, Pages 53-61]
Mahmoodi Surestani, Mohammad The Electronic Nose Technique for Non-Destructive clustering of Basil as a Medicinal Plant [Volume 2, Issue 4, 2019, Pages 54-60]
Mansourghanaei, Mohammadhossein Evaluation of mechanical properties of reinforced concrete based on non-destructive test of ultrasonic waves, Under high heat [Volume 2, Issue 9, 2022, Pages 52-62]
Mansouri, Mohammad Hosein Implementation of the neutron computed tomography by means of Filtered-back Projection algorithm in Tehran Research Reactor [Volume 2, Issue 9, 2022, Pages 129-139]
Mehdikhani, Hesam Leak Detection in Pressurized Pipe Using Acoustic Emission Method [Volume 2, Issue 4, 2019, Pages 46-53]
Meshkizadeh, Pouria Implementing Thermal Image Processing Techniques for Enhancing the Detectability of Defects in Thermography of Additive Manufacturing Components [Volume 2, Issue 6, 2020, Pages 36-45]
Mianji, Fereidoon A Method for Full Testing Coverage of the Ends of Parts and Pipes in AUT [Volume 2, Issue 2, 2018, Pages 38-41]
Mianji, Fereidoun Study the most important causes of abnormal radiation in industrial radiography [Volume 2, Issue 1, 2017, Pages 43-46]
Mirghasemi, Mohammad hossein ASNT NDT Level III [Volume 2, Issue 1, 2017, Pages 10-13]
Mohammadi, Mohsen Development of a Measurement System for Nondestructive Determination of Dielectric Constant and Magnetic Permeability of Materials, Using an Enhanced Microwave Chamber Disturbance Method [Volume 2, Issue 9, 2022, Pages 107-114]
Mohammadi, Nasim Finite Element Modeling of Lamb Waves Propagation in a Thickness Variable Plate [Volume 2, Issue 6, 2020, Pages 2-11]
Mohammadzadeh, Noorodin Calculations simulator for industrial radiography gamma sources [Volume 2, Issue 1, 2017, Pages 55-60]
Mohammadzadeh, Nouroddin Evaluation of corrosion in ammonia transfer tubes by digital radiography and image processing [Volume 2, Issue 2, 2018, Pages 32-37]
Mokhtarizadeh, Armin Detection of dimensions of axisymmetric surface defects located on the pipe using the first order symmetric torsional guided waves [Volume 2, Issue 7, 2021, Pages 51-59]
Molla zadeh, Kaveh Nondestructive measurement of apple's pomace [Volume 2, Issue 1, 2017, Pages 35-42]
Moradi, Gholamreza Evaluation of corrosion in ammonia transfer tubes by digital radiography and image processing [Volume 2, Issue 2, 2018, Pages 32-37]
Moradiannejad, FARZAD The modern technology of non-destructive test using terahertz waves [Volume 2, Issue 3, 2019, Pages 42-49]
Mortazavi, S. Mohammad Ali The modern technology of non-destructive test using terahertz waves [Volume 2, Issue 3, 2019, Pages 42-49]
Mostafapour, Amir Leak Detection in Pressurized Pipe Using Acoustic Emission Method [Volume 2, Issue 4, 2019, Pages 46-53]
Mousavi Torshizi, Seyyed Ebrahim Numerical modeling of local residual stress detection in thin plates using the fundamental antisymmetric mode of ultrasonic Lamb waves [Volume 2, Issue 7, 2021, Pages 70-78]
Movafeghi, Amir Calculations simulator for industrial radiography gamma sources [Volume 2, Issue 1, 2017, Pages 55-60]
Movafeghi, Amir Evaluation of corrosion in ammonia transfer tubes by digital radiography and image processing [Volume 2, Issue 2, 2018, Pages 32-37]
Movafeghi, Amir Use of non-local means algorithm and radiography to detect defects in aircraft parts [Volume 2, Issue 4, 2019, Pages 3-8]
Movafeghi, Amir Design and construction of the neutron radiography facility for Tehran Research Reactor with real-time digital imaging capability [Volume 2, Issue 7, 2021, Pages 24-32]
Movafeghi, Amir Projection Data Acquisition in Industrial Fan-Beam Computed Tomography Using Monte Carlo Modeling in Gas and Oil Pipelines Non-destructive testing [Volume 2, Issue 7, 2021, Pages 88-95]
Movafeghi, Amir A study of internal structure of two antique handguns by means of radiographic inspection [Volume 2, Issue 9, 2022, Pages 63-68]
Movafeghi, Amir Implementation of the neutron computed tomography by means of Filtered-back Projection algorithm in Tehran Research Reactor [Volume 2, Issue 9, 2022, Pages 129-139]

R

Ranjbar, Mohammad Javad Ultrasonic Evaluation Using Higher Order Lamb Wave Modes [Volume 2, Issue 6, 2020, Pages 12-19]
Rastkhah, Naser History of qualification of non-destructive testing personnel in Iran [Volume 2, Issue 2, 2018, Pages 7-9]
Refahi Oskouei, Amir Improve the Quality of the Images Obtained by Magnetic Flux Leakage on Wire Ropes Using Wavelet Analysis [Volume 2, Issue 5, 2020, Pages 38-43]
Refahi Oskouei, Amir Design and Construction of Magnetic Sensor Set to Detect Internal Defects Based on Magnetic Field Perturbation [Volume 2, Issue 7, 2021, Pages 44-50]
Rezaee Hajideh, Mojtaba Implementing Thermal Image Processing Techniques for Enhancing the Detectability of Defects in Thermography of Additive Manufacturing Components [Volume 2, Issue 6, 2020, Pages 36-45]
Rezaee Hajideh, Mojtaba Thermal signal reconstruction and employment of K clustering method for inspection of additive manufactured polymer parts [Volume 2, Issue 7, 2021, Pages 60-69]
Rezaeizadeh, Masoud Detection of Incipient Failure of Rolling Element bearings by Vibration Analysis (Case Study) [Volume 2, Issue 6, 2020, Pages 20-25]
Rezghi Maleki, Hadi Feasibility of digital image correlation for non-destructive evaluation [Volume 2, Issue 7, 2021, Pages 121-127]
Riahi, mohammad Determination of Elastic Constants of Additive Manufactured Inconel-625 parts by means of Ultrasonic Technique [Volume 2, Issue 7, 2021, Pages 2-13]
Riahi, mohammad Utilization of engineered (embedded) features in additive manufactured parts for calibration of ultrasonic testing equipment [Volume 2, Issue 8, 2021, Pages 27-40]
Riahi, Mohammad A Review on Inspection Methods of Pipelines [Volume 2, Issue 4, 2019, Pages 9-20]
Rokrok, Behrooz Calculations simulator for industrial radiography gamma sources [Volume 2, Issue 1, 2017, Pages 55-60]
Rokrok, Behrouz Design and construction of the neutron radiography facility for Tehran Research Reactor with real-time digital imaging capability [Volume 2, Issue 7, 2021, Pages 24-32]
Rokrok, Behrouz Implementation of the neutron computed tomography by means of Filtered-back Projection algorithm in Tehran Research Reactor [Volume 2, Issue 9, 2022, Pages 129-139]
Rostami, Hossein Study of curved composites drilling behavior using time-domain acoustic signal analysis [Volume 2, Issue 5, 2020, Pages 30-37]
Rostami, Peyman Evaluation of corrosion in ammonia transfer tubes by digital radiography and image processing [Volume 2, Issue 2, 2018, Pages 32-37]

S

Sadeghi, Seyed Hosein Detection and Sizing of Fatigue Cracks in Metallic Structures from Eddy Current Probe Signals [Volume 2, Issue 2, 2018, Pages 42-48]
Sadeghi, Seyed Hossein Hesamedin Development of a Measurement System for Nondestructive Determination of Dielectric Constant and Magnetic Permeability of Materials, Using an Enhanced Microwave Chamber Disturbance Method [Volume 2, Issue 9, 2022, Pages 107-114]
Sadeghi pour, Vahid Comparison of symptoms measurement methods [Volume 2, Issue 1, 2017, Pages 28-34]
Sadri, Mohsen Improve the Quality of the Images Obtained by Magnetic Flux Leakage on Wire Ropes Using Wavelet Analysis [Volume 2, Issue 5, 2020, Pages 38-43]
Safarabadi, Majid Using of Modulated Thermography for Nondestructive Testing of Polymer Plates [Volume 2, Issue 4, 2019, Pages 38-45]
Safari, Mehran Comparison of symptoms measurement methods [Volume 2, Issue 1, 2017, Pages 28-34]
Saghafi, Hamed Study of curved composites drilling behavior using time-domain acoustic signal analysis [Volume 2, Issue 5, 2020, Pages 30-37]
Sahhaf Naeini, Hossein Numerical modeling of local residual stress detection in thin plates using the fundamental antisymmetric mode of ultrasonic Lamb waves [Volume 2, Issue 7, 2021, Pages 70-78]
Sazgar, Amjad Application of the laser shearography in the non-destructive evaluation of the defects in the flat and curved surfaces made of carbon fiber composites [Volume 2, Issue 7, 2021, Pages 14-23]
Sazgar, Amjad Article English Title for Nondestructive Testing Technology Journal Evaluation of X-Ray Radiography, Laser Shearography and I.R. Thermography in the defect detection of the Carbon Reinforced Polymer Composite Panels [Volume 2, Issue 8, 2021, Pages 78-85]
Shabani, Ramin Estimation of uncertainty in measurement of ultrasonic wave attenuation [Volume 2, Issue 7, 2021, Pages 128-133]
Shamloo, Reza Comparison of two methods of digital radiography in the pipe industry [Volume 2, Issue 1, 2017, Pages 47-54]
ShayganFar, Pouyan Use of non-local means algorithm and radiography to detect defects in aircraft parts [Volume 2, Issue 4, 2019, Pages 3-8]
Sodagar, Sina Ultrasonic Evaluation Using Higher Order Lamb Wave Modes [Volume 2, Issue 6, 2020, Pages 12-19]
Sodagar, Sina Effect of Orders of Scattering in Linear Grating of Fibrous Reinforced Composites Using Resonance Ultrasonic Spectroscopy [Volume 2, Issue 8, 2021, Pages 69-77]
SoleymaniNatanzi, Mohammad Article English Title for Nondestructive Testing Technology Journal Evaluation of X-Ray Radiography, Laser Shearography and I.R. Thermography in the defect detection of the Carbon Reinforced Polymer Composite Panels [Volume 2, Issue 8, 2021, Pages 78-85]
Soltani, Nasser Feasibility of digital image correlation for non-destructive evaluation [Volume 2, Issue 7, 2021, Pages 121-127]
Soltani, Nasser Investigating the possibility of crack detection using digital image correlation with laser speckles [Volume 2, Issue 8, 2021, Pages 2-7]
Soorgee, Mohammad Hossein Numerical Damage Detection in Composite Pipe Adhesive Joints Using Ultrasonic Guided Waves [Volume 2, Issue 6, 2020, Pages 72-81]
Soorgee, Mohammad Hossein Numerical modeling of local residual stress detection in thin plates using the fundamental antisymmetric mode of ultrasonic Lamb waves [Volume 2, Issue 7, 2021, Pages 70-78]
Soori, Ali The modern technology of non-destructive test using terahertz waves [Volume 2, Issue 3, 2019, Pages 42-49]

NDT Technology

Author Index

A

B

C

D

E

F

G

H

J

K

M

N

P

R

S

T

V

Y

Z