Abbasi, Majid Effect of Field Factors on the Evaluation of Corrosion of Storage Tanks Floor by Magnetic Flux Leakage Method [Volume 3, Issue 2, 2023, Pages 27-38]
Afarideh, Hossein Non-destructive Evaluation of Corrosion Under Insulation in Oil and Gas Pipelines Using Gamma and X-ray Linear Profilers Using Monte Carlo Method [Volume 3, Issue 4, 2024, Pages 60-67]
Ahmadi Najafabadi, Mehdi Evaluation of Acoustic Emission Signals to Detect Stress Corrosion Cracking Mechanisms of AA7075-T6 Aluminum Pipe by Fuzzy Clustering Method (FCM) [Volume 3, Issue 3, 2024, Pages 38-46]
Akbari, Davod Application of Through Transmission Ultrasonic Evaluation in Carbon Fiber Reinforced Composites [Volume 3, Issue 4, 2024, Pages 99-109]
Akbari, Davood Nondestructive Inspection of Agglomeration Defects in Polymer-Based Nano-Composites Using Laser Interferometry Method [Volume 3, Issue 1, 2022, Pages 52-63]
Akbari, Davood Application of Electrical Stimulation for Inspection of Composite Materials in The Thermography Method [Volume 3, Issue 1, 2022, Pages 2-12]
Akbari, Davood Non-destructive Testing of Planar Defects Using Shearography Method with Modulated Ultrasonic Excitation [Volume 3, Issue 3, 2024, Pages 84-95]
Alaei, Mohammad Hossein Evaluation and health monitoring of the thermal insulation honeycomb sandwich wall of the cryogenic tank by thermography method [Volume 3, Issue 4, 2024, Pages 11-22]
Alibeigi, Ehsan Analyzing the Impact of Detector Rotation Angle on Truck Cargo Scanner System Response with the MCNPX Code [Volume 3, Issue 3, 2024, Pages 56-69]
Ansari, Arman Application of Electrical Stimulation for Inspection of Composite Materials in The Thermography Method [Volume 3, Issue 1, 2022, Pages 2-12]
Araghian, Nafise Improvement of defect size Measurement in Radiography Images by Recursive Image Processing Method [Volume 3, Issue 4, 2024, Pages 33-40]
Araghian, Nafiseh Contrast Enhancement for NDT Images of Turbine Blades by Means of X-ray/Neutron Radiography [Volume 3, Issue 2, 2023, Pages 39-48]
Ardebili, Amirreza Evaluation and health monitoring of the thermal insulation honeycomb sandwich wall of the cryogenic tank by thermography method [Volume 3, Issue 4, 2024, Pages 11-22]
Ashnavar, Alireza A Review on Using Ultrasonic Waves to Evaluate the Characteristics of Asphalt Pavement [Volume 3, Issue 2, 2023, Pages 62-70]
Askari, Mojtaba Quality Assessment of Gypsum Structure Using Tomography Method (Modeling and Experimental) [Volume 3, Issue 1, 2022, Pages 72-83]
Askari, Mojtaba Analyzing the Impact of Detector Rotation Angle on Truck Cargo Scanner System Response with the MCNPX Code [Volume 3, Issue 3, 2024, Pages 56-69]
Ayar, Pooyan A Review on Using Ultrasonic Waves to Evaluate the Characteristics of Asphalt Pavement [Volume 3, Issue 2, 2023, Pages 62-70]
Azadmanesh, Sima Exploring the Advancements in Non-Destructive Testing Techniques for Assessing Plant Seed Viability [Volume 3, Issue 2, 2023, Pages 71-83]
B
Badiei, Shahryar Thickness Measurement of Metals Using Neural Network and Radioisotope Measurement-Modelling [Volume 3, Issue 2, 2023, Pages 1-15]
Badri, Mojtaba Improvement Contrast of Welding Radiographs with Weighted Median Filter [Volume 3, Issue 4, 2024, Pages 50-59]
Bayati, Abbas Non-Destructive Testing of the Welded Joints Using Infrared Thermography Technique [Volume 3, Issue 3, 2024, Pages 13-26]
Beigzadeh, Amirmohamamd Analyzing the Impact of Detector Rotation Angle on Truck Cargo Scanner System Response with the MCNPX Code [Volume 3, Issue 3, 2024, Pages 56-69]
Beigzadeh, AmirMohammad Quality Assessment of Gypsum Structure Using Tomography Method (Modeling and Experimental) [Volume 3, Issue 1, 2022, Pages 72-83]
Beigzadeh, AmirMohammad Thickness Measurement of Metals Using Neural Network and Radioisotope Measurement-Modelling [Volume 3, Issue 2, 2023, Pages 1-15]
Beigzadeh, AmirMohammad Improving Fire Safety: Feasibility of Gamma Ray Cargo Scanner Performance for Fire Extinguishers Inspection [Volume 3, Issue 3, 2024, Pages 70-83]
C
Chai, Jong-Seo Non-destructive Evaluation of Corrosion Under Insulation in Oil and Gas Pipelines Using Gamma and X-ray Linear Profilers Using Monte Carlo Method [Volume 3, Issue 4, 2024, Pages 60-67]
D
Daemi, Ali Investigating the Effect of Adding Natural Fibers on Interlaminar Fracture Toughness of Glass/Epoxy Composites Under Mode Ⅰ Loading Using Acoustic Emission Test [Volume 3, Issue 3, 2024, Pages 96-107]
E
Ebrahim Fathabadi, Hadi In-Line Inspection (ILI) Methods of Pipelines [Volume 3, Issue 2, 2023, Pages 84-92]
Ebtekar, Hamidreza Prioritization of Critical Equipment in the Gas Compression Station Considering HSE Risk-Based Maintenance Planning [Volume 3, Issue 1, 2022, Pages 84-92]
Eskandari Jam, Jafar Evaluation of Acoustic Emission Signals to Detect Stress Corrosion Cracking Mechanisms of AA7075-T6 Aluminum Pipe by Fuzzy Clustering Method (FCM) [Volume 3, Issue 3, 2024, Pages 38-46]
Eskandari Jam, Jafar Evaluation and health monitoring of the thermal insulation honeycomb sandwich wall of the cryogenic tank by thermography method [Volume 3, Issue 4, 2024, Pages 11-22]
F
Farahani, Mohammadreza Evaluating the Circular Defect Detection Capability in Thermography Testing by the Use of Analytical Method [Volume 3, Issue 1, 2022, Pages 23-31]
Farahani, Mohammadreza Non-Destructive Testing of the Welded Joints Using Infrared Thermography Technique [Volume 3, Issue 3, 2024, Pages 13-26]
Fazeli, Hamid Evaluation of Acoustic Emission Signals to Detect Stress Corrosion Cracking Mechanisms of AA7075-T6 Aluminum Pipe by Fuzzy Clustering Method (FCM) [Volume 3, Issue 3, 2024, Pages 38-46]
G
Ghafari Khezri, Amin Experimental and numerical study of the design and development of a magnetic flux leakage inspection device to detect defects on ferromagnetic plate with the aim of optimizing the effective parameters [Volume 3, Issue 4, 2024, Pages 1-10]
Ghafele-Bashi, Sayed Mohammad Hosein Fourier Transforms for Recognition of Weld Defects in Industrial Radiography [Volume 3, Issue 1, 2022, Pages 13-22]
Ghanooni, Mohsen A Study of the Materials Used in Teymorid Miniature by Nondestructive Analyses [Volume 3, Issue 1, 2022, Pages 64-71]
Ghasemi, Faezeh Improvement of defect size Measurement in Radiography Images by Recursive Image Processing Method [Volume 3, Issue 4, 2024, Pages 33-40]
Ghassabzadeh Saryazdi, Maryam Diagnosing the clearance fault of the camshaft in the hot test stage at the end of the production line by using of audio signal processing [Volume 3, Issue 4, 2024, Pages 41-49]
Ghergherehchi, Mitra Non-destructive Evaluation of Corrosion Under Insulation in Oil and Gas Pipelines Using Gamma and X-ray Linear Profilers Using Monte Carlo Method [Volume 3, Issue 4, 2024, Pages 60-67]
Ghiyasi Limanjubi, Seyyedeh Maryam Improvement Contrast of Welding Radiographs with Weighted Median Filter [Volume 3, Issue 4, 2024, Pages 50-59]
Gholamiyan Nezhad, Gholamreza Estimation of Delamination in Polymer Composites Reinforced with Metal Pins under Mode I Loading Using Acoustic Emission Method [Volume 3, Issue 1, 2022, Pages 32-51]
Ghorbani, Mohammad In-Line Inspection (ILI) Methods of Pipelines [Volume 3, Issue 2, 2023, Pages 84-92]
Goli Karimabadi, Alireza Diagnosing the clearance fault of the camshaft in the hot test stage at the end of the production line by using of audio signal processing [Volume 3, Issue 4, 2024, Pages 41-49]
H
Hajighasemi, Saeed Evaluation of Acoustic Emission Signals to Detect Stress Corrosion Cracking Mechanisms of AA7075-T6 Aluminum Pipe by Fuzzy Clustering Method (FCM) [Volume 3, Issue 3, 2024, Pages 38-46]
Hamzeloo, Seyed Reza An Empirical study on fracture mode I Of Epoxy/Glass composite beam with different angles using Electromechanical Impedance (EMI) method [Volume 3, Issue 2, 2023, Pages 49-61]
Hamzeloo, Seyed Reza Investigating the Effect of Adding Natural Fibers on Interlaminar Fracture Toughness of Glass/Epoxy Composites Under Mode Ⅰ Loading Using Acoustic Emission Test [Volume 3, Issue 3, 2024, Pages 96-107]
Honarvar, Farhang Novel Approach for Simultaneous Measurement of Elastic Properties and Attenuation Coefficients of ABS Polymers Using Ultrasonic Scattering [Volume 3, Issue 4, 2024, Pages 86-98]
K
Kabir, Mostafa Non-destructive Evaluation of Corrosion Under Insulation in Oil and Gas Pipelines Using Gamma and X-ray Linear Profilers Using Monte Carlo Method [Volume 3, Issue 4, 2024, Pages 60-67]
Kari, Mohammadreza Novel Approach for Simultaneous Measurement of Elastic Properties and Attenuation Coefficients of ABS Polymers Using Ultrasonic Scattering [Volume 3, Issue 4, 2024, Pages 86-98]
Kaveh, Amir Evaluation and health monitoring of the thermal insulation honeycomb sandwich wall of the cryogenic tank by thermography method [Volume 3, Issue 4, 2024, Pages 11-22]
Kermani, Aboutaleb Improvement of defect size Measurement in Radiography Images by Recursive Image Processing Method [Volume 3, Issue 4, 2024, Pages 33-40]
Khaleghi, Alireza An Empirical study on fracture mode I Of Epoxy/Glass composite beam with different angles using Electromechanical Impedance (EMI) method [Volume 3, Issue 2, 2023, Pages 49-61]
M
Mahani, Hojjat Analyzing the Impact of Detector Rotation Angle on Truck Cargo Scanner System Response with the MCNPX Code [Volume 3, Issue 3, 2024, Pages 56-69]
Miri Lavasani, Seyed Mohammadreza Prioritization of Critical Equipment in the Gas Compression Station Considering HSE Risk-Based Maintenance Planning [Volume 3, Issue 1, 2022, Pages 84-92]
Mirzaee, Majid A review of non-destructive inspection techniques inspection for wind turbine blades [Volume 3, Issue 4, 2024, Pages 68-85]
Mirzapour, Mahdi Investigating the defects of gas pipes with industrial gamma radiography method and weighted anisotropic–isotropic total variation [Volume 3, Issue 3, 2024, Pages 47-55]
Mohammadian, Milad Nondestructive Inspection of Agglomeration Defects in Polymer-Based Nano-Composites Using Laser Interferometry Method [Volume 3, Issue 1, 2022, Pages 52-63]
Mojtaba, Askari Improving Fire Safety: Feasibility of Gamma Ray Cargo Scanner Performance for Fire Extinguishers Inspection [Volume 3, Issue 3, 2024, Pages 70-83]
Moosavian, Ashkan Diagnosing the clearance fault of the camshaft in the hot test stage at the end of the production line by using of audio signal processing [Volume 3, Issue 4, 2024, Pages 41-49]
Moslemkhany, Cobra Exploring the Advancements in Non-Destructive Testing Techniques for Assessing Plant Seed Viability [Volume 3, Issue 2, 2023, Pages 71-83]
Movafeghi, Amir Fourier Transforms for Recognition of Weld Defects in Industrial Radiography [Volume 3, Issue 1, 2022, Pages 13-22]
Movafeghi, Amir Contrast Enhancement for NDT Images of Turbine Blades by Means of X-ray/Neutron Radiography [Volume 3, Issue 2, 2023, Pages 39-48]
Movafeghi, Amir Investigating the defects of gas pipes with industrial gamma radiography method and weighted anisotropic–isotropic total variation [Volume 3, Issue 3, 2024, Pages 47-55]
Movafeghi, Amir Improvement of defect size Measurement in Radiography Images by Recursive Image Processing Method [Volume 3, Issue 4, 2024, Pages 33-40]
Movafrghi, Amir The use of industrial radiography in troubleshooting and diagnosing the structure of electronic boards for reverse engineering [Volume 3, Issue 4, 2024, Pages 23-32]
N
Naghshnejad, Zeinab Contrast Enhancement for NDT Images of Turbine Blades by Means of X-ray/Neutron Radiography [Volume 3, Issue 2, 2023, Pages 39-48]
Naghshnezhad, Zeinab Improvement of defect size Measurement in Radiography Images by Recursive Image Processing Method [Volume 3, Issue 4, 2024, Pages 33-40]
Nategh, Keyhan Evaluating the Circular Defect Detection Capability in Thermography Testing by the Use of Analytical Method [Volume 3, Issue 1, 2022, Pages 23-31]
Nikoomaram, Hanieh Prioritization of Critical Equipment in the Gas Compression Station Considering HSE Risk-Based Maintenance Planning [Volume 3, Issue 1, 2022, Pages 84-92]
O
Ohadi, Abdolreza Diagnosing the clearance fault of the camshaft in the hot test stage at the end of the production line by using of audio signal processing [Volume 3, Issue 4, 2024, Pages 41-49]
R
Refahi Oskouei, Amir Estimation of Delamination in Polymer Composites Reinforced with Metal Pins under Mode I Loading Using Acoustic Emission Method [Volume 3, Issue 1, 2022, Pages 32-51]
Refahi Oskouei, Amir Investigating the Effect of Adding Natural Fibers on Interlaminar Fracture Toughness of Glass/Epoxy Composites Under Mode Ⅰ Loading Using Acoustic Emission Test [Volume 3, Issue 3, 2024, Pages 96-107]
Refahi Oskouei, Amir Experimental and numerical study of the design and development of a magnetic flux leakage inspection device to detect defects on ferromagnetic plate with the aim of optimizing the effective parameters [Volume 3, Issue 4, 2024, Pages 1-10]
Refahi Oskuei, Amir An Empirical study on fracture mode I Of Epoxy/Glass composite beam with different angles using Electromechanical Impedance (EMI) method [Volume 3, Issue 2, 2023, Pages 49-61]
Rezaei, Mohammad Evaluation of microstructural changes of Rene-80 super alloy turbine blades of J85 engine by non-destructive Eddy current method [Volume 3, Issue 3, 2024, Pages 1-12]
Riahi, mohammad Investigating Non-destructive Tests Used in the Inspection of Parts Produced by Additive Manufacturing (AM) Method, [Volume 3, Issue 3, 2024, Pages 108-123]
Rokrok, Behrouz Contrast Enhancement for NDT Images of Turbine Blades by Means of X-ray/Neutron Radiography [Volume 3, Issue 2, 2023, Pages 39-48]
Rokrok, Behrouz Improvement of defect size Measurement in Radiography Images by Recursive Image Processing Method [Volume 3, Issue 4, 2024, Pages 33-40]
Ruhi, Ali A Review on Using Ultrasonic Waves to Evaluate the Characteristics of Asphalt Pavement [Volume 3, Issue 2, 2023, Pages 62-70]
S
Sabbaghi Farshi, sina Non-destructive Testing of Planar Defects Using Shearography Method with Modulated Ultrasonic Excitation [Volume 3, Issue 3, 2024, Pages 84-95]
Saeedi, Mitra A Study of the Materials Used in Teymorid Miniature by Nondestructive Analyses [Volume 3, Issue 1, 2022, Pages 64-71]
Sajadi, Vajihehsadat Novel Approach for Simultaneous Measurement of Elastic Properties and Attenuation Coefficients of ABS Polymers Using Ultrasonic Scattering [Volume 3, Issue 4, 2024, Pages 86-98]
Sedghi, Yasin A Study of the Materials Used in Teymorid Miniature by Nondestructive Analyses [Volume 3, Issue 1, 2022, Pages 64-71]
Shahabi, Mahdi Application of Through Transmission Ultrasonic Evaluation in Carbon Fiber Reinforced Composites [Volume 3, Issue 4, 2024, Pages 99-109]
Shirmardi, Seyed Pezhman Analyzing the Impact of Detector Rotation Angle on Truck Cargo Scanner System Response with the MCNPX Code [Volume 3, Issue 3, 2024, Pages 56-69]
Shojaee, Amirahamad Improvement of defect size Measurement in Radiography Images by Recursive Image Processing Method [Volume 3, Issue 4, 2024, Pages 33-40]
Shomalinasab, Mohammad Taghi FE-based Ultrasonic Evaluation of HDPE Butt Fusion Joints [Volume 3, Issue 2, 2023, Pages 16-26]
Sodagar, Sina FE-based Ultrasonic Evaluation of HDPE Butt Fusion Joints [Volume 3, Issue 2, 2023, Pages 16-26]
Soleymani, Asma Investigating Non-destructive Tests Used in the Inspection of Parts Produced by Additive Manufacturing (AM) Method, [Volume 3, Issue 3, 2024, Pages 108-123]
T
Taghavi Jelodar, Reza Effect of Field Factors on the Evaluation of Corrosion of Storage Tanks Floor by Magnetic Flux Leakage Method [Volume 3, Issue 2, 2023, Pages 27-38]
Taheri, Ali Analyzing the Impact of Detector Rotation Angle on Truck Cargo Scanner System Response with the MCNPX Code [Volume 3, Issue 3, 2024, Pages 56-69]
Tizmaghz Nejad, Mohamad Nondestructive Inspection of Agglomeration Defects in Polymer-Based Nano-Composites Using Laser Interferometry Method [Volume 3, Issue 1, 2022, Pages 52-63]
Y
Yahaghi, Effat Fourier Transforms for Recognition of Weld Defects in Industrial Radiography [Volume 3, Issue 1, 2022, Pages 13-22]
Yahaghi, Effat Contrast Enhancement for NDT Images of Turbine Blades by Means of X-ray/Neutron Radiography [Volume 3, Issue 2, 2023, Pages 39-48]
Yahaghi, Effat Improvement Contrast of Welding Radiographs with Weighted Median Filter [Volume 3, Issue 4, 2024, Pages 50-59]
Yar Mohammadi, Askar Fourier Transforms for Recognition of Weld Defects in Industrial Radiography [Volume 3, Issue 1, 2022, Pages 13-22]
Z
Zarei, Hamidreza Evaluation of microstructural changes of Rene-80 super alloy turbine blades of J85 engine by non-destructive Eddy current method [Volume 3, Issue 3, 2024, Pages 1-12]
