NDT Technology

NDT Technology

Keyword Index
A
  • Acoustic Hazelnut Sorting Using Acoustic Response [Volume 4, Issue 1, 2024-2025, Pages 72-84]
  • Acoustic Emission Leak Detection in Pressurized Pipe Using Acoustic Emission Method [Volume 2, Issue 4, 2017-2021, Pages 46-53]
  • Acoustic Emission Investigating Damages of Drop Impact on Sandwich Panel Shell by Finite Element Method and Acoustic Emission [Volume 2, Issue 5, 2017-2021, Pages 60-69]
  • Acoustic Emission Experimental Study and leak investigation of Composite Pressure Vessel By Acoustic Emission Method [Volume 2, Issue 9, 2017-2021, Pages 13-32]
  • Acoustic Emission Estimation of Delamination in Polymer Composites Reinforced with Metal Pins under Mode I Loading Using Acoustic Emission Method [Volume 3, Issue 1, 2022-2024, Pages 32-51]
  • Acoustic Emission Evaluation of Acoustic Emission Signals to Detect Stress Corrosion Cracking Mechanisms of AA7075-T6 Aluminum Pipe by Fuzzy Clustering Method (FCM) [Volume 3, Issue 3, 2022-2024, Pages 38-46]
  • Acoustic Emission A review of non-destructive inspection techniques inspection for wind turbine blades [Volume 3, Issue 4, 2022-2024, Pages 68-85]
  • Acoustic Emission Examining In-Plane Shear Damage in Composite Cylinders Through the Use of Acoustic Emission Techniques [Volume 4, Issue 1, 2024-2025, Pages 85-96]
  • Acoustic Emission (AE) In-Line Inspection (ILI) Methods of Pipelines [Volume 3, Issue 2, 2022-2024, Pages 84-92]
  • Acoustic Emission signals Study of curved composites drilling behavior using time-domain acoustic signal analysis [Volume 2, Issue 5, 2017-2021, Pages 30-37]
  • Acoustic Emission Test Investigating the Effect of Adding Natural Fibers on Interlaminar Fracture Toughness of Glass/Epoxy Composites Under Mode Ⅰ Loading Using Acoustic Emission Test [Volume 3, Issue 3, 2022-2024, Pages 96-107]
  • Acoustic response Nondestructive apple quality assessment using acoustic-vibrational response and artificial neural network [Volume 2, Issue 9, 2017-2021, Pages 98-106]
  • Acoustic Scattering Novel Approach for Simultaneous Measurement of Elastic Properties and Attenuation Coefficients of ABS Polymers Using Ultrasonic Scattering [Volume 3, Issue 4, 2022-2024, Pages 86-98]
  • Acoustoelasticity Numerical modeling of local residual stress detection in thin plates using the fundamental antisymmetric mode of ultrasonic Lamb waves [Volume 2, Issue 7, 2017-2021, Pages 70-78]
  • Active thermography Application of Active IR Thermography in Defect detection of FDM printed parts with different infill percentage [Volume 2, Issue 9, 2017-2021, Pages 2-12]
  • Additive Manufacturing Implementing Thermal Image Processing Techniques for Enhancing the Detectability of Defects in Thermography of Additive Manufacturing Components [Volume 2, Issue 6, 2017-2021, Pages 36-45]
  • Additive Manufacturing Thermal signal reconstruction and employment of K clustering method for inspection of additive manufactured polymer parts [Volume 2, Issue 7, 2017-2021, Pages 60-69]
  • Additive Manufacturing Application of Active IR Thermography in Defect detection of FDM printed parts with different infill percentage [Volume 2, Issue 9, 2017-2021, Pages 2-12]
  • Adhesive Joint Inspection Numerical Damage Detection in Composite Pipe Adhesive Joints Using Ultrasonic Guided Waves [Volume 2, Issue 6, 2017-2021, Pages 72-81]
  • Adulteration .Olive oil Nondestructive Quality Assessment of Extra Virgin Olive Oil by Ultrasound [Volume 2, Issue 6, 2017-2021, Pages 62-71]
  • Agglomeration Nondestructive Inspection of Agglomeration Defects in Polymer-Based Nano-Composites Using Laser Interferometry Method [Volume 3, Issue 1, 2022-2024, Pages 52-63]
  • Air Injection Inspection of flight control surfaces made by honeycomb sandwich panels with use of Thermography method and Air Injection [Volume 2, Issue 4, 2017-2021, Pages 21-31]
  • Akaike information criteria Leak Detection in Pressurized Pipe Using Acoustic Emission Method [Volume 2, Issue 4, 2017-2021, Pages 46-53]
  • Alkaline alkaline concrete Evaluation of mechanical properties of reinforced concrete based on non-destructive test of ultrasonic waves, Under high heat [Volume 2, Issue 9, 2017-2021, Pages 52-62]
  • Aluminum pipe Evaluation of Acoustic Emission Signals to Detect Stress Corrosion Cracking Mechanisms of AA7075-T6 Aluminum Pipe by Fuzzy Clustering Method (FCM) [Volume 3, Issue 3, 2022-2024, Pages 38-46]
  • Ammonia Tubes Evaluation of corrosion in ammonia transfer tubes by digital radiography and image processing [Volume 2, Issue 2, 2017-2021, Pages 32-37]
  • API X65 Steel Application of nondestructive magnetic flux leakage method in characterization of mechanical properties of API X65 steel [Volume 2, Issue 7, 2017-2021, Pages 114-120]
  • Apple Firmness Nondestructive apple quality assessment using acoustic-vibrational response and artificial neural network [Volume 2, Issue 9, 2017-2021, Pages 98-106]
  • Apple quality assessment Nondestructive apple quality assessment using acoustic-vibrational response and artificial neural network [Volume 2, Issue 9, 2017-2021, Pages 98-106]
  • Artificial Neural Network Implementation of neural networks for prediction of location and orientation of pipe defects in guided wave ultrasonic testing [Volume 2, Issue 8, 2017-2021, Pages 8-17]
  • Artificial Neural Network Thickness Measurement of Metals Using Neural Network and Radioisotope Measurement-Modelling [Volume 3, Issue 2, 2022-2024, Pages 1-15]
  • A-scan Implementation of an Imaging System Using Ultrasonic Phased Array [Volume 2, Issue 3, 2017-2021, Pages 23-31]
  • ASNT NDT Level III ASNT NDT Level III [Volume 2, Issue 1, 2017-2021, Pages 10-13]
  • Attenuation Estimation of uncertainty in measurement of ultrasonic wave attenuation [Volume 2, Issue 7, 2017-2021, Pages 128-133]
  • Attenuation FE-based Ultrasonic Evaluation of HDPE Butt Fusion Joints [Volume 3, Issue 2, 2022-2024, Pages 16-26]
  • Attenuation coefficient of the polymer material Novel Approach for Simultaneous Measurement of Elastic Properties and Attenuation Coefficients of ABS Polymers Using Ultrasonic Scattering [Volume 3, Issue 4, 2022-2024, Pages 86-98]
  • Automatic defect detection Thermal signal reconstruction and employment of K clustering method for inspection of additive manufactured polymer parts [Volume 2, Issue 7, 2017-2021, Pages 60-69]
B
  • Backscatter Imaging Performance Evaluation of Backscatter Imaging System with Scintillator Detector and Pencil X-ray in Real Environment Conditions [Volume 4, Issue 1, 2024-2025, Pages 25-37]
  • Backscattering Case depth measurement of steel components by contact ultrasonic backscattering technique [Volume 2, Issue 9, 2017-2021, Pages 69-76]
  • Basil plant The Electronic Nose Technique for Non-Destructive clustering of Basil as a Medicinal Plant [Volume 2, Issue 4, 2017-2021, Pages 54-60]
  • Bearing Detection of Incipient Failure of Rolling Element bearings by Vibration Analysis (Case Study) [Volume 2, Issue 6, 2017-2021, Pages 20-25]
  • Benchmark Utilization of engineered (embedded) features in additive manufactured parts for calibration of ultrasonic testing equipment [Volume 2, Issue 8, 2017-2021, Pages 27-40]
  • B-scan Implementation of an Imaging System Using Ultrasonic Phased Array [Volume 2, Issue 3, 2017-2021, Pages 23-31]
  • Building Structure Quality Assessment of Gypsum Structure Using Tomography Method (Modeling and Experimental) [Volume 3, Issue 1, 2022-2024, Pages 72-83]
C
  • Calculations simulator for industrial radiography gamma sources Calculations simulator for industrial radiography gamma sources [Volume 2, Issue 1, 2017-2021, Pages 55-60]
  • Carbon Fiber Reinforced Composites Application of Through Transmission Ultrasonic Evaluation in Carbon Fiber Reinforced Composites [Volume 3, Issue 4, 2022-2024, Pages 99-109]
  • Carbon Fibers Composites Application of Electrical Stimulation for Inspection of Composite Materials in The Thermography Method [Volume 3, Issue 1, 2022-2024, Pages 2-12]
  • Carbon Reinforced Composites Article English Title for Nondestructive Testing Technology Journal Evaluation of X-Ray Radiography, Laser Shearography and I.R. Thermography in the defect detection of the Carbon Reinforced Polymer Composite Panels [Volume 2, Issue 8, 2017-2021, Pages 78-85]
  • Cargo scanner Analyzing the Impact of Detector Rotation Angle on Truck Cargo Scanner System Response with the MCNPX Code [Volume 3, Issue 3, 2022-2024, Pages 56-69]
  • Cast Stainless Steel Nondestructive Evaluation of Reformer Tubes in Direct Reduction of Iron Unit by Eddy Current Test Method [Volume 2, Issue 7, 2017-2021, Pages 33-43]
  • CCTV-based inspection technique A Review on Inspection Methods of Pipelines [Volume 2, Issue 4, 2017-2021, Pages 9-20]
  • Chamber perturbation method Development of a Measurement System for Nondestructive Determination of Dielectric Constant and Magnetic Permeability of Materials, Using an Enhanced Microwave Chamber Disturbance Method [Volume 2, Issue 9, 2017-2021, Pages 107-114]
  • Characterization A Study of the Materials Used in Teymorid Miniature by Nondestructive Analyses [Volume 3, Issue 1, 2022-2024, Pages 64-71]
  • Chopper wheel Performance Evaluation of Backscatter Imaging System with Scintillator Detector and Pencil X-ray in Real Environment Conditions [Volume 4, Issue 1, 2024-2025, Pages 25-37]
  • CNG vessels Periodic Inspection Challenges of steel CNG vessels and possible defects [Volume 2, Issue 2, 2017-2021, Pages 26-31]
  • Coated metals Improving the nondestructive thermography inspection results for detection of circular defects in coated metals using principal component analysis [Volume 2, Issue 9, 2017-2021, Pages 33-40]
  • Comparison of symptoms measurement methods Comparison of symptoms measurement methods [Volume 2, Issue 1, 2017-2021, Pages 28-34]
  • Comparison of two methods of digital radiography in the pipe industry Comparison of two methods of digital radiography in the pipe industry [Volume 2, Issue 1, 2017-2021, Pages 47-54]
  • Complex Wavelet Method Evaluation of corrosion in ammonia transfer tubes by digital radiography and image processing [Volume 2, Issue 2, 2017-2021, Pages 32-37]
  • Composite Investigating Damages of Drop Impact on Sandwich Panel Shell by Finite Element Method and Acoustic Emission [Volume 2, Issue 5, 2017-2021, Pages 60-69]
  • Composite pipes Numerical Damage Detection in Composite Pipe Adhesive Joints Using Ultrasonic Guided Waves [Volume 2, Issue 6, 2017-2021, Pages 72-81]
  • Composite Pressure Vessel Experimental Study and leak investigation of Composite Pressure Vessel By Acoustic Emission Method [Volume 2, Issue 9, 2017-2021, Pages 13-32]
  • Composites Non-destructive Testing of Planar Defects Using Shearography Method with Modulated Ultrasonic Excitation [Volume 3, Issue 3, 2022-2024, Pages 84-95]
  • Computed Tomography Projection Data Acquisition in Industrial Fan-Beam Computed Tomography Using Monte Carlo Modeling in Gas and Oil Pipelines Non-destructive testing [Volume 2, Issue 7, 2017-2021, Pages 88-95]
  • Computed Tomography Feasibility Study of Tomography using Cargo Scanner System by Modeling and Experimental Methods [Volume 2, Issue 9, 2017-2021, Pages 77-87]
  • Computed Tomography Quality Assessment of Gypsum Structure Using Tomography Method (Modeling and Experimental) [Volume 3, Issue 1, 2022-2024, Pages 72-83]
  • Concrete microstructure Evaluation of mechanical properties of reinforced concrete based on non-destructive test of ultrasonic waves, Under high heat [Volume 2, Issue 9, 2017-2021, Pages 52-62]
  • Contact method Case depth measurement of steel components by contact ultrasonic backscattering technique [Volume 2, Issue 9, 2017-2021, Pages 69-76]
  • Copper electrode Evaluation of Plasma gliding-arc discharges electrode defects by positron annihilation life-time spectroscopy [Volume 2, Issue 7, 2017-2021, Pages 96-103]
  • Corrosion Defect Design and Construction of Magnetic Sensor Set to Detect Internal Defects Based on Magnetic Field Perturbation [Volume 2, Issue 7, 2017-2021, Pages 44-50]
  • Corrosion monitoring Application of Electrochemical Impedance Spectroscopy (EIS) as an NDT method in Corrosion Monitoring and Analysis [Volume 2, Issue 5, 2017-2021, Pages 44-59]
  • Corrosion Under Insulation Non-destructive Evaluation of Corrosion Under Insulation in Oil and Gas Pipelines Using Gamma and X-ray Linear Profilers Using Monte Carlo Method [Volume 3, Issue 4, 2022-2024, Pages 60-67]
  • Cosine Fourier Transform Fourier Transforms for Recognition of Weld Defects in Industrial Radiography [Volume 3, Issue 1, 2022-2024, Pages 13-22]
  • Crack Capability of Digital Shearography in Crack Defect Inspection [Volume 2, Issue 8, 2017-2021, Pages 41-61]
  • Crack Detection of Cracks and Lack of Fusion in Butt Joint Arc Welding Using Low Cost Acoustical Sensors [Volume 4, Issue 1, 2024-2025, Pages 14-24]
  • Crack detection Investigating the possibility of crack detection using digital image correlation with laser speckles [Volume 2, Issue 8, 2017-2021, Pages 2-7]
  • Crack Growth An Empirical study on fracture mode I Of Epoxy/Glass composite beam with different angles using Electromechanical Impedance (EMI) method [Volume 3, Issue 2, 2022-2024, Pages 49-61]
  • CT Image Reconstruction with FBP method Implementation of the neutron computed tomography by means of Filtered-back Projection algorithm in Tehran Research Reactor [Volume 2, Issue 9, 2017-2021, Pages 129-139]
  • Cultural heritage A study of internal structure of two antique handguns by means of radiographic inspection [Volume 2, Issue 9, 2017-2021, Pages 63-68]
D
  • Damage Evaluation of Severity and Type of Damages in Steam ‎Reformer Tubes using Nondestructive Eddy Current Method [Volume 4, Issue 1, 2024-2025, Pages 1-13]
  • Damage Mechanisms Examining In-Plane Shear Damage in Composite Cylinders Through the Use of Acoustic Emission Techniques [Volume 4, Issue 1, 2024-2025, Pages 85-96]
  • Data-Driven Modeling Design of a Hybrid Data-Driven Classification Model for Optimal Selection of Non-Destructive Testing Methods in Weld Inspection [Volume 4, Issue 1, 2024-2025, Pages 57-71]
  • Defect Using of Modulated Thermography for Nondestructive Testing of Polymer Plates [Volume 2, Issue 4, 2017-2021, Pages 38-45]
  • Defects Measurment Capability of Digital Shearography in Crack Defect Inspection [Volume 2, Issue 8, 2017-2021, Pages 41-61]
  • Delamination Investigating Damages of Drop Impact on Sandwich Panel Shell by Finite Element Method and Acoustic Emission [Volume 2, Issue 5, 2017-2021, Pages 60-69]
  • Delamination Estimation of Delamination in Polymer Composites Reinforced with Metal Pins under Mode I Loading Using Acoustic Emission Method [Volume 3, Issue 1, 2022-2024, Pages 32-51]
  • Destructive and Non Destructive Application of Digital Image Correlation method for measurement of residual stress (A review) [Volume 2, Issue 5, 2017-2021, Pages 70-82]
  • Dielectric Constant Development of a Measurement System for Nondestructive Determination of Dielectric Constant and Magnetic Permeability of Materials, Using an Enhanced Microwave Chamber Disturbance Method [Volume 2, Issue 9, 2017-2021, Pages 107-114]
  • Digital Image Correlation Application of Digital Image Correlation method for measurement of residual stress (A review) [Volume 2, Issue 5, 2017-2021, Pages 70-82]
  • Digital Image Correlation Investigating the possibility of crack detection using digital image correlation with laser speckles [Volume 2, Issue 8, 2017-2021, Pages 2-7]
  • Digital Image Correlation Method Non-destructive residual stress measurement using digital image correlation method [Volume 2, Issue 3, 2017-2021, Pages 50-58]
  • Digital Neutron Imaging Design and construction of the neutron radiography facility for Tehran Research Reactor with real-time digital imaging capability [Volume 2, Issue 7, 2017-2021, Pages 24-32]
  • Digital shearography A Review on Non-Destructive Identification of Defects in Fiber Reinforced Polymeric Base Composites [Volume 2, Issue 5, 2017-2021, Pages 14-29]
  • Digital shearography Application of the laser shearography in the non-destructive evaluation of the defects in the flat and curved surfaces made of carbon fiber composites [Volume 2, Issue 7, 2017-2021, Pages 14-23]
  • Digital shearography Article English Title for Nondestructive Testing Technology Journal Evaluation of X-Ray Radiography, Laser Shearography and I.R. Thermography in the defect detection of the Carbon Reinforced Polymer Composite Panels [Volume 2, Issue 8, 2017-2021, Pages 78-85]
  • Digital shearography Non-destructive Testing of Planar Defects Using Shearography Method with Modulated Ultrasonic Excitation [Volume 3, Issue 3, 2022-2024, Pages 84-95]
  • Direct Reduction of Iron Nondestructive Evaluation of Reformer Tubes in Direct Reduction of Iron Unit by Eddy Current Test Method [Volume 2, Issue 7, 2017-2021, Pages 33-43]
  • Discrete Fourier Transform Fourier Transforms for Recognition of Weld Defects in Industrial Radiography [Volume 3, Issue 1, 2022-2024, Pages 13-22]
  • Dispersion Nondestructive Inspection of Agglomeration Defects in Polymer-Based Nano-Composites Using Laser Interferometry Method [Volume 3, Issue 1, 2022-2024, Pages 52-63]
  • Dispersion FE-based Ultrasonic Evaluation of HDPE Butt Fusion Joints [Volume 3, Issue 2, 2022-2024, Pages 16-26]
  • Do not forget pelasko Do not forget pelasko [Volume 2, Issue 1, 2017-2021, Pages 14-17]
  • Dose constraint Effectiveness of Interventional Actions in Reduction of Unusual Exposure in Industrial Radiography in Iran [Volume 2, Issue 4, 2017-2021, Pages 32-37]
  • Dosimetry Effectiveness of Interventional Actions in Reduction of Unusual Exposure in Industrial Radiography in Iran [Volume 2, Issue 4, 2017-2021, Pages 32-37]
  • Drilling Study of curved composites drilling behavior using time-domain acoustic signal analysis [Volume 2, Issue 5, 2017-2021, Pages 30-37]
  • Drop Test Investigating Damages of Drop Impact on Sandwich Panel Shell by Finite Element Method and Acoustic Emission [Volume 2, Issue 5, 2017-2021, Pages 60-69]
  • Drum Detection of Incipient Failure of Rolling Element bearings by Vibration Analysis (Case Study) [Volume 2, Issue 6, 2017-2021, Pages 20-25]
E
  • EASA UK National Aerospace NDT Board (NANDTB) [Volume 2, Issue 2, 2017-2021, Pages 14-18]
  • Eddy current Non-Destructive Evaluation of High Chromium Cast Iron ‎Mill Balls with Eddy Current Test [Volume 2, Issue 2, 2017-2021, Pages 49-57]
  • Eddy current Detection and Sizing of Fatigue Cracks in Metallic Structures from Eddy Current Probe Signals [Volume 2, Issue 2, 2017-2021, Pages 42-48]
  • Eddy Current (EC) In-Line Inspection (ILI) Methods of Pipelines [Volume 3, Issue 2, 2022-2024, Pages 84-92]
  • Eddy current test Design and fabrication of a non-destructive system for detecting and measuring cracks in RDD-S11 rail defect detector equipment [Volume 2, Issue 9, 2017-2021, Pages 41-51]
  • Eddy Current Testing Metallurgical Quality Control of Aged 7075 Al Alloy Using Eddy Current Nondestructive Testing Method [Volume 2, Issue 6, 2017-2021, Pages 26-35]
  • Eddy Current Testing Nondestructive Evaluation of Reformer Tubes in Direct Reduction of Iron Unit by Eddy Current Test Method [Volume 2, Issue 7, 2017-2021, Pages 33-43]
  • Eddy Current Testing Evaluation of Severity and Type of Damages in Steam ‎Reformer Tubes using Nondestructive Eddy Current Method [Volume 4, Issue 1, 2024-2025, Pages 1-13]
  • Elastic Constants Determination of Elastic Constants of Additive Manufactured Inconel-625 parts by means of Ultrasonic Technique [Volume 2, Issue 7, 2017-2021, Pages 2-13]
  • Electrochemical Impedance Spectroscopy (EIS) Application of Electrochemical Impedance Spectroscopy (EIS) as an NDT method in Corrosion Monitoring and Analysis [Volume 2, Issue 5, 2017-2021, Pages 44-59]
  • Electromagnetic Acoustic Transducer (EMAT) In-Line Inspection (ILI) Methods of Pipelines [Volume 3, Issue 2, 2022-2024, Pages 84-92]
  • Electromechanical Impedance An Empirical study on fracture mode I Of Epoxy/Glass composite beam with different angles using Electromechanical Impedance (EMI) method [Volume 3, Issue 2, 2022-2024, Pages 49-61]
  • Electronic Board The use of industrial radiography in troubleshooting and diagnosing the structure of electronic boards for reverse engineering [Volume 3, Issue 4, 2022-2024, Pages 23-32]
  • Embedded Sensors A review on road structural health monitoring novel methods inside the pavement [Volume 2, Issue 8, 2017-2021, Pages 86-104]
  • Enhancing the Contrast Implementation of Index Vectors Utilizing Artificial Intelligence to Enhance the Contrast of Weld Radiograph [Volume 4, Issue 1, 2024-2025, Pages 47-56]
  • Erossion Finite Element Modeling of Lamb Waves Propagation in a Thickness Variable Plate [Volume 2, Issue 6, 2017-2021, Pages 2-11]
F
  • Facebook AI Similarity Search (FAISS) Implementation of Index Vectors Utilizing Artificial Intelligence to Enhance the Contrast of Weld Radiograph [Volume 4, Issue 1, 2024-2025, Pages 47-56]
  • Fan-beam industrial CT Projection Data Acquisition in Industrial Fan-Beam Computed Tomography Using Monte Carlo Modeling in Gas and Oil Pipelines Non-destructive testing [Volume 2, Issue 7, 2017-2021, Pages 88-95]
  • Fault Diagnosis Diagnosing the clearance fault of the camshaft in the hot test stage at the end of the production line by using of audio signal processing [Volume 3, Issue 4, 2022-2024, Pages 41-49]
  • FDM Process Application of Active IR Thermography in Defect detection of FDM printed parts with different infill percentage [Volume 2, Issue 9, 2017-2021, Pages 2-12]
  • Feature Extraction Implementation of neural networks for prediction of location and orientation of pipe defects in guided wave ultrasonic testing [Volume 2, Issue 8, 2017-2021, Pages 8-17]
  • Feature selection Appropriate Feature Selection for Creating Health Index in Rotary Machines Utilizing the Prognostic Health Management System [Volume 2, Issue 6, 2017-2021, Pages 53-61]
  • FEM Finite Element Modeling of Lamb Waves Propagation in a Thickness Variable Plate [Volume 2, Issue 6, 2017-2021, Pages 2-11]
  • Fiber reinforced polymer composites A Review on Non-Destructive Identification of Defects in Fiber Reinforced Polymeric Base Composites [Volume 2, Issue 5, 2017-2021, Pages 14-29]
  • Filament wounding Examining In-Plane Shear Damage in Composite Cylinders Through the Use of Acoustic Emission Techniques [Volume 4, Issue 1, 2024-2025, Pages 85-96]
  • Film radiography Design and construction of the neutron radiography facility for Tehran Research Reactor with real-time digital imaging capability [Volume 2, Issue 7, 2017-2021, Pages 24-32]
  • Finite element method Numerical Damage Detection in Composite Pipe Adhesive Joints Using Ultrasonic Guided Waves [Volume 2, Issue 6, 2017-2021, Pages 72-81]
  • Finite element method Numerical modeling of local residual stress detection in thin plates using the fundamental antisymmetric mode of ultrasonic Lamb waves [Volume 2, Issue 7, 2017-2021, Pages 70-78]
  • Fire extinguisher Improving Fire Safety: Feasibility of Gamma Ray Cargo Scanner Performance for Fire Extinguishers Inspection [Volume 3, Issue 3, 2022-2024, Pages 70-83]
  • Firefly Algorithm Implementation of neural networks for prediction of location and orientation of pipe defects in guided wave ultrasonic testing [Volume 2, Issue 8, 2017-2021, Pages 8-17]
  • Fracture Mechanism An Empirical study on fracture mode I Of Epoxy/Glass composite beam with different angles using Electromechanical Impedance (EMI) method [Volume 3, Issue 2, 2022-2024, Pages 49-61]
  • Fuzzy Clustering Evaluation of Acoustic Emission Signals to Detect Stress Corrosion Cracking Mechanisms of AA7075-T6 Aluminum Pipe by Fuzzy Clustering Method (FCM) [Volume 3, Issue 3, 2022-2024, Pages 38-46]
G
  • Gabor filter Comparison of radiography testing and ultraviolet inspection in identifying hidden designs and defects of exquisite paintings [Volume 2, Issue 7, 2017-2021, Pages 79-87]
  • Gadolinium tagging Contrast Enhancement for NDT Images of Turbine Blades by Means of X-ray/Neutron Radiography [Volume 3, Issue 2, 2022-2024, Pages 39-48]
  • Gamma Radiation Improving Fire Safety: Feasibility of Gamma Ray Cargo Scanner Performance for Fire Extinguishers Inspection [Volume 3, Issue 3, 2022-2024, Pages 70-83]
  • Gamma radiography Feasibility Study of Tomography using Cargo Scanner System by Modeling and Experimental Methods [Volume 2, Issue 9, 2017-2021, Pages 77-87]
  • Gamma radiography Quality Assessment of Gypsum Structure Using Tomography Method (Modeling and Experimental) [Volume 3, Issue 1, 2022-2024, Pages 72-83]
  • Gamma radiography Investigating the defects of gas pipes with industrial gamma radiography method and weighted anisotropic–isotropic total variation [Volume 3, Issue 3, 2022-2024, Pages 47-55]
  • Gamma radiography Enhancing Image Accuracy and Clarity through Combined Neutron and Gamma Radiography for Internal Material Structure Analysis Using MCNP Simulation [Volume 4, Issue 1, 2024-2025, Pages 38-46]
  • Gamma ray Thickness Measurement of Metals Using Neural Network and Radioisotope Measurement-Modelling [Volume 3, Issue 2, 2022-2024, Pages 1-15]
  • Gas Compression Station Prioritization of Critical Equipment in the Gas Compression Station Considering HSE Risk-Based Maintenance Planning [Volume 3, Issue 1, 2022-2024, Pages 84-92]
  • Gas turbine Investigation in common defects in investment casting by industrial X-ray radiography in the oil and gas industry [Volume 2, Issue 8, 2017-2021, Pages 18-26]
  • Gas Turbine Blade Nondestructive Evaluation of Gas Turbine Blade Cooling Holes Blockage by Thermography [Volume 2, Issue 6, 2017-2021, Pages 46-52]
  • Gaussian convolution Contrast Enhancement for NDT Images of Turbine Blades by Means of X-ray/Neutron Radiography [Volume 3, Issue 2, 2022-2024, Pages 39-48]
  • GD-XRay Radiographs Improvement Contrast of Welding Radiographs with Weighted Median Filter [Volume 3, Issue 4, 2022-2024, Pages 50-59]
  • GFRP Experimental Study and leak investigation of Composite Pressure Vessel By Acoustic Emission Method [Volume 2, Issue 9, 2017-2021, Pages 13-32]
  • Gliding arc discharge Evaluation of Plasma gliding-arc discharges electrode defects by positron annihilation life-time spectroscopy [Volume 2, Issue 7, 2017-2021, Pages 96-103]
  • GRNN Artificial neural network Non-destructive determination of side and vertical wear at the surface of railways [Volume 2, Issue 9, 2017-2021, Pages 88-97]
  • Guided waves Ultrasonic Evaluation Using Higher Order Lamb Wave Modes [Volume 2, Issue 6, 2017-2021, Pages 12-19]
  • Guided waves Detection of dimensions of axisymmetric surface defects located on the pipe using the first order symmetric torsional guided waves [Volume 2, Issue 7, 2017-2021, Pages 51-59]
H
  • Hastelloy X Investigation in common defects in investment casting by industrial X-ray radiography in the oil and gas industry [Volume 2, Issue 8, 2017-2021, Pages 18-26]
  • Hazelnut Hazelnut Sorting Using Acoustic Response [Volume 4, Issue 1, 2024-2025, Pages 72-84]
  • Health Index Appropriate Feature Selection for Creating Health Index in Rotary Machines Utilizing the Prognostic Health Management System [Volume 2, Issue 6, 2017-2021, Pages 53-61]
  • Hidden Defects Improvement Contrast of Welding Radiographs with Weighted Median Filter [Volume 3, Issue 4, 2022-2024, Pages 50-59]
  • Hidden Designs and Defects Comparison of radiography testing and ultraviolet inspection in identifying hidden designs and defects of exquisite paintings [Volume 2, Issue 7, 2017-2021, Pages 79-87]
  • High Chromium Cast Iron Non-Destructive Evaluation of High Chromium Cast Iron ‎Mill Balls with Eddy Current Test [Volume 2, Issue 2, 2017-2021, Pages 49-57]
  • High Density Polyethylene (HDPE). Butt fusion FE-based Ultrasonic Evaluation of HDPE Butt Fusion Joints [Volume 3, Issue 2, 2022-2024, Pages 16-26]
  • High frequency Ultrasonic Evaluation Using Higher Order Lamb Wave Modes [Volume 2, Issue 6, 2017-2021, Pages 12-19]
  • High order modes Ultrasonic Evaluation Using Higher Order Lamb Wave Modes [Volume 2, Issue 6, 2017-2021, Pages 12-19]
  • Honeycomb composites Evaluation and health monitoring of the thermal insulation honeycomb sandwich wall of the cryogenic tank by thermography method [Volume 3, Issue 4, 2022-2024, Pages 11-22]
  • Honeycomb Sandwich Panels Inspection Inspection of flight control surfaces made by honeycomb sandwich panels with use of Thermography method and Air Injection [Volume 2, Issue 4, 2017-2021, Pages 21-31]
  • HP40Nb Evaluation of Severity and Type of Damages in Steam ‎Reformer Tubes using Nondestructive Eddy Current Method [Volume 4, Issue 1, 2024-2025, Pages 1-13]
  • HSE Prioritization of Critical Equipment in the Gas Compression Station Considering HSE Risk-Based Maintenance Planning [Volume 3, Issue 1, 2022-2024, Pages 84-92]
  • Hydrated gels Evaluation of mechanical properties of reinforced concrete based on non-destructive test of ultrasonic waves, Under high heat [Volume 2, Issue 9, 2017-2021, Pages 52-62]
  • Hyperspectral Imaging Rapid detection of pesticide-contaminated product using novel methods of NDT Technology [Volume 2, Issue 2, 2017-2021, Pages 58-65]
I
  • ICAS system Designing a system for detection and analysis of transformer electrical insulation contamination (ICAS) based on radiographic images processing [Volume 2, Issue 7, 2017-2021, Pages 104-113]
  • Immersion Estimation of uncertainty in measurement of ultrasonic wave attenuation [Volume 2, Issue 7, 2017-2021, Pages 128-133]
  • Impedance &lrm Nondestructive Evaluation of Reformer Tubes in Direct Reduction of Iron Unit by Eddy Current Test Method [Volume 2, Issue 7, 2017-2021, Pages 33-43]
  • Inconel-625 Determination of Elastic Constants of Additive Manufactured Inconel-625 parts by means of Ultrasonic Technique [Volume 2, Issue 7, 2017-2021, Pages 2-13]
  • In-depth Monitoring A review on road structural health monitoring novel methods inside the pavement [Volume 2, Issue 8, 2017-2021, Pages 86-104]
  • Induction hardening Case depth measurement of steel components by contact ultrasonic backscattering technique [Volume 2, Issue 9, 2017-2021, Pages 69-76]
  • Industrial Radiography Evaluation of corrosion in ammonia transfer tubes by digital radiography and image processing [Volume 2, Issue 2, 2017-2021, Pages 32-37]
  • Industrial Radiography Effectiveness of Interventional Actions in Reduction of Unusual Exposure in Industrial Radiography in Iran [Volume 2, Issue 4, 2017-2021, Pages 32-37]
  • Industrial Radiography Investigation in common defects in investment casting by industrial X-ray radiography in the oil and gas industry [Volume 2, Issue 8, 2017-2021, Pages 18-26]
  • Industrial Radiography Fourier Transforms for Recognition of Weld Defects in Industrial Radiography [Volume 3, Issue 1, 2022-2024, Pages 13-22]
  • Industrial Radiography The use of industrial radiography in troubleshooting and diagnosing the structure of electronic boards for reverse engineering [Volume 3, Issue 4, 2022-2024, Pages 23-32]
  • Industrial Radiography Improvement of defect size Measurement in Radiography Images by Recursive Image Processing Method [Volume 3, Issue 4, 2022-2024, Pages 33-40]
  • Industrial Radiography Improvement Contrast of Welding Radiographs with Weighted Median Filter [Volume 3, Issue 4, 2022-2024, Pages 50-59]
  • Infrared Thermography Thermography with Radiation Excitation for Non-Destructive Evaluation of Composite and Sheet Metal [Volume 2, Issue 5, 2017-2021, Pages 3-13]
  • Infrared Thermography Application of Electrical Stimulation for Inspection of Composite Materials in The Thermography Method [Volume 3, Issue 1, 2022-2024, Pages 2-12]
  • Infrared Thermography Non-Destructive Testing of the Welded Joints Using Infrared Thermography Technique [Volume 3, Issue 3, 2022-2024, Pages 13-26]
  • Initiation of Delamination Investigating the Effect of Adding Natural Fibers on Interlaminar Fracture Toughness of Glass/Epoxy Composites Under Mode Ⅰ Loading Using Acoustic Emission Test [Volume 3, Issue 3, 2022-2024, Pages 96-107]
  • Inkjet Utilization of engineered (embedded) features in additive manufactured parts for calibration of ultrasonic testing equipment [Volume 2, Issue 8, 2017-2021, Pages 27-40]
  • In-plane Shear properties Examining In-Plane Shear Damage in Composite Cylinders Through the Use of Acoustic Emission Techniques [Volume 4, Issue 1, 2024-2025, Pages 85-96]
  • Inspection Periodic Inspection Challenges of steel CNG vessels and possible defects [Volume 2, Issue 2, 2017-2021, Pages 26-31]
  • Inspection Experimental and numerical study of the design and development of a magnetic flux leakage inspection device to detect defects on ferromagnetic plate with the aim of optimizing the effective parameters [Volume 3, Issue 4, 2022-2024, Pages 1-10]
  • Insulated panel Evaluation and health monitoring of the thermal insulation honeycomb sandwich wall of the cryogenic tank by thermography method [Volume 3, Issue 4, 2022-2024, Pages 11-22]
  • Interlaminar Fracture Toughness Investigating the Effect of Adding Natural Fibers on Interlaminar Fracture Toughness of Glass/Epoxy Composites Under Mode Ⅰ Loading Using Acoustic Emission Test [Volume 3, Issue 3, 2022-2024, Pages 96-107]
  • Interlayer Fracture Toughness Estimation of Delamination in Polymer Composites Reinforced with Metal Pins under Mode I Loading Using Acoustic Emission Method [Volume 3, Issue 1, 2022-2024, Pages 32-51]
  • Internal combustion engine Diagnosing the clearance fault of the camshaft in the hot test stage at the end of the production line by using of audio signal processing [Volume 3, Issue 4, 2022-2024, Pages 41-49]
  • Internal Structure Analysis Enhancing Image Accuracy and Clarity through Combined Neutron and Gamma Radiography for Internal Material Structure Analysis Using MCNP Simulation [Volume 4, Issue 1, 2024-2025, Pages 38-46]
  • Internal Wall of Tube Design and Construction of Magnetic Sensor Set to Detect Internal Defects Based on Magnetic Field Perturbation [Volume 2, Issue 7, 2017-2021, Pages 44-50]
  • Internet of Things The Role of Spectroscopy as an Optical Non-destructive Technology in Development of Smart Agriculture [Volume 2, Issue 5, 2017-2021, Pages 83-92]
  • Inverse algorithm Detection and Sizing of Fatigue Cracks in Metallic Structures from Eddy Current Probe Signals [Volume 2, Issue 2, 2017-2021, Pages 42-48]
  • Inverse Problem Novel Approach for Simultaneous Measurement of Elastic Properties and Attenuation Coefficients of ABS Polymers Using Ultrasonic Scattering [Volume 3, Issue 4, 2022-2024, Pages 86-98]
  • Investigation level Effectiveness of Interventional Actions in Reduction of Unusual Exposure in Industrial Radiography in Iran [Volume 2, Issue 4, 2017-2021, Pages 32-37]
  • Investment Casting Investigation in common defects in investment casting by industrial X-ray radiography in the oil and gas industry [Volume 2, Issue 8, 2017-2021, Pages 18-26]
  • IRCCP IRNDT Central Certification Program for NDT Personals [Volume 2, Issue 1, 2017-2021, Pages 7-9]
  • IRCCP Why the central standard IRCCP? [Volume 2, Issue 2, 2017-2021, Pages 10-13]
K
  • Keywords - Additive manufacturing Utilization of engineered (embedded) features in additive manufactured parts for calibration of ultrasonic testing equipment [Volume 2, Issue 8, 2017-2021, Pages 27-40]
  • Keywords: Additive Manufacturing Determination of Elastic Constants of Additive Manufactured Inconel-625 parts by means of Ultrasonic Technique [Volume 2, Issue 7, 2017-2021, Pages 2-13]
L
  • Lack of fusion Detection of Cracks and Lack of Fusion in Butt Joint Arc Welding Using Low Cost Acoustical Sensors [Volume 4, Issue 1, 2024-2025, Pages 14-24]
  • Lamb Guided Waves Finite Element Modeling of Lamb Waves Propagation in a Thickness Variable Plate [Volume 2, Issue 6, 2017-2021, Pages 2-11]
  • Lamb wave Ultrasonic Evaluation Using Higher Order Lamb Wave Modes [Volume 2, Issue 6, 2017-2021, Pages 12-19]
  • Lamb waves Numerical modeling of local residual stress detection in thin plates using the fundamental antisymmetric mode of ultrasonic Lamb waves [Volume 2, Issue 7, 2017-2021, Pages 70-78]
  • Laser-camera system Non-destructive determination of side and vertical wear at the surface of railways [Volume 2, Issue 9, 2017-2021, Pages 88-97]
  • Laser DIC Feasibility of digital image correlation for non-destructive evaluation [Volume 2, Issue 7, 2017-2021, Pages 121-127]
  • Laser Interferometry Nondestructive Inspection of Agglomeration Defects in Polymer-Based Nano-Composites Using Laser Interferometry Method [Volume 3, Issue 1, 2022-2024, Pages 52-63]
  • Laser Shearing interferometry Application of the laser shearography in the non-destructive evaluation of the defects in the flat and curved surfaces made of carbon fiber composites [Volume 2, Issue 7, 2017-2021, Pages 14-23]
  • Leakage Experimental Study and leak investigation of Composite Pressure Vessel By Acoustic Emission Method [Volume 2, Issue 9, 2017-2021, Pages 13-32]
  • Life Assessment Nondestructive Evaluation of Reformer Tubes in Direct Reduction of Iron Unit by Eddy Current Test Method [Volume 2, Issue 7, 2017-2021, Pages 33-43]
  • Life Assessment Evaluation of Severity and Type of Damages in Steam ‎Reformer Tubes using Nondestructive Eddy Current Method [Volume 4, Issue 1, 2024-2025, Pages 1-13]
  • Lock-In Thermography Inspection of flight control surfaces made by honeycomb sandwich panels with use of Thermography method and Air Injection [Volume 2, Issue 4, 2017-2021, Pages 21-31]
  • Long Pulse Thermography Evaluating the Circular Defect Detection Capability in Thermography Testing by the Use of Analytical Method [Volume 3, Issue 1, 2022-2024, Pages 23-31]
M
  • Machine Learning Design of a Hybrid Data-Driven Classification Model for Optimal Selection of Non-Destructive Testing Methods in Weld Inspection [Volume 4, Issue 1, 2024-2025, Pages 57-71]
  • Machine Vision A review of non-destructive inspection techniques inspection for wind turbine blades [Volume 3, Issue 4, 2022-2024, Pages 68-85]
  • Magnetic Field Perturbation Design and Construction of Magnetic Sensor Set to Detect Internal Defects Based on Magnetic Field Perturbation [Volume 2, Issue 7, 2017-2021, Pages 44-50]
  • Magnetic Flux Leakage Improve the Quality of the Images Obtained by Magnetic Flux Leakage on Wire Ropes Using Wavelet Analysis [Volume 2, Issue 5, 2017-2021, Pages 38-43]
  • Magnetic Flux Leakage Experimental and numerical study of the design and development of a magnetic flux leakage inspection device to detect defects on ferromagnetic plate with the aim of optimizing the effective parameters [Volume 3, Issue 4, 2022-2024, Pages 1-10]
  • Magnetic Flux Leakage (MFL) In-Line Inspection (ILI) Methods of Pipelines [Volume 3, Issue 2, 2022-2024, Pages 84-92]
  • Magnetic flux leakage test Application of nondestructive magnetic flux leakage method in characterization of mechanical properties of API X65 steel [Volume 2, Issue 7, 2017-2021, Pages 114-120]
  • Magnetic flux leakage test Design and fabrication of a non-destructive system for detecting and measuring cracks in RDD-S11 rail defect detector equipment [Volume 2, Issue 9, 2017-2021, Pages 41-51]
  • Magnetic permeability Development of a Measurement System for Nondestructive Determination of Dielectric Constant and Magnetic Permeability of Materials, Using an Enhanced Microwave Chamber Disturbance Method [Volume 2, Issue 9, 2017-2021, Pages 107-114]
  • Material properties Enhancing Image Accuracy and Clarity through Combined Neutron and Gamma Radiography for Internal Material Structure Analysis Using MCNP Simulation [Volume 4, Issue 1, 2024-2025, Pages 38-46]
  • MCNPX Feasibility Study of Tomography using Cargo Scanner System by Modeling and Experimental Methods [Volume 2, Issue 9, 2017-2021, Pages 77-87]
  • MCNPX Quality Assessment of Gypsum Structure Using Tomography Method (Modeling and Experimental) [Volume 3, Issue 1, 2022-2024, Pages 72-83]
  • MCNPX code Analyzing the Impact of Detector Rotation Angle on Truck Cargo Scanner System Response with the MCNPX Code [Volume 3, Issue 3, 2022-2024, Pages 56-69]
  • Measurement Development of a Measurement System for Nondestructive Determination of Dielectric Constant and Magnetic Permeability of Materials, Using an Enhanced Microwave Chamber Disturbance Method [Volume 2, Issue 9, 2017-2021, Pages 107-114]
  • Mechanical properties Application of nondestructive magnetic flux leakage method in characterization of mechanical properties of API X65 steel [Volume 2, Issue 7, 2017-2021, Pages 114-120]
  • Metal Z-pins Estimation of Delamination in Polymer Composites Reinforced with Metal Pins under Mode I Loading Using Acoustic Emission Method [Volume 3, Issue 1, 2022-2024, Pages 32-51]
  • Microstructural changes Application of nondestructive magnetic flux leakage method in characterization of mechanical properties of API X65 steel [Volume 2, Issue 7, 2017-2021, Pages 114-120]
  • Mill Balls Non-Destructive Evaluation of High Chromium Cast Iron ‎Mill Balls with Eddy Current Test [Volume 2, Issue 2, 2017-2021, Pages 49-57]
  • Mode I Estimation of Delamination in Polymer Composites Reinforced with Metal Pins under Mode I Loading Using Acoustic Emission Method [Volume 3, Issue 1, 2022-2024, Pages 32-51]
  • Mode Ⅰ Investigating the Effect of Adding Natural Fibers on Interlaminar Fracture Toughness of Glass/Epoxy Composites Under Mode Ⅰ Loading Using Acoustic Emission Test [Volume 3, Issue 3, 2022-2024, Pages 96-107]
  • Modified Total Variation method The use of industrial radiography in troubleshooting and diagnosing the structure of electronic boards for reverse engineering [Volume 3, Issue 4, 2022-2024, Pages 23-32]
  • Modulated Using of Modulated Thermography for Nondestructive Testing of Polymer Plates [Volume 2, Issue 4, 2017-2021, Pages 38-45]
  • Modulation Frequency Non-destructive Testing of Planar Defects Using Shearography Method with Modulated Ultrasonic Excitation [Volume 3, Issue 3, 2022-2024, Pages 84-95]
  • Monte Carlo Thickness Measurement of Metals Using Neural Network and Radioisotope Measurement-Modelling [Volume 3, Issue 2, 2022-2024, Pages 1-15]
  • Monte Carlo Method Projection Data Acquisition in Industrial Fan-Beam Computed Tomography Using Monte Carlo Modeling in Gas and Oil Pipelines Non-destructive testing [Volume 2, Issue 7, 2017-2021, Pages 88-95]
  • Multi-sensor inspection technique A Review on Inspection Methods of Pipelines [Volume 2, Issue 4, 2017-2021, Pages 9-20]
N
  • NANDTB UK National Aerospace NDT Board (NANDTB) [Volume 2, Issue 2, 2017-2021, Pages 14-18]
  • Nanocomposites Nondestructive Inspection of Agglomeration Defects in Polymer-Based Nano-Composites Using Laser Interferometry Method [Volume 3, Issue 1, 2022-2024, Pages 52-63]
  • Natural Fiber Investigating the Effect of Adding Natural Fibers on Interlaminar Fracture Toughness of Glass/Epoxy Composites Under Mode Ⅰ Loading Using Acoustic Emission Test [Volume 3, Issue 3, 2022-2024, Pages 96-107]
  • NDE Metallurgical Quality Control of Aged 7075 Al Alloy Using Eddy Current Nondestructive Testing Method [Volume 2, Issue 6, 2017-2021, Pages 26-35]
  • NDT A Review on Non-Destructive Identification of Defects in Fiber Reinforced Polymeric Base Composites [Volume 2, Issue 5, 2017-2021, Pages 14-29]
  • NDT Improving the nondestructive thermography inspection results for detection of circular defects in coated metals using principal component analysis [Volume 2, Issue 9, 2017-2021, Pages 33-40]
  • NDT Technology Rapid detection of pesticide-contaminated product using novel methods of NDT Technology [Volume 2, Issue 2, 2017-2021, Pages 58-65]
  • Neural Network Diagnosing the clearance fault of the camshaft in the hot test stage at the end of the production line by using of audio signal processing [Volume 3, Issue 4, 2022-2024, Pages 41-49]
  • Neutron Beam-line Design and construction of the neutron radiography facility for Tehran Research Reactor with real-time digital imaging capability [Volume 2, Issue 7, 2017-2021, Pages 24-32]
  • Neutron Computed Tomography (nCT) Implementation of the neutron computed tomography by means of Filtered-back Projection algorithm in Tehran Research Reactor [Volume 2, Issue 9, 2017-2021, Pages 129-139]
  • Neutron Radiography Design and construction of the neutron radiography facility for Tehran Research Reactor with real-time digital imaging capability [Volume 2, Issue 7, 2017-2021, Pages 24-32]
  • Neutron Radiography Enhancing Image Accuracy and Clarity through Combined Neutron and Gamma Radiography for Internal Material Structure Analysis Using MCNP Simulation [Volume 4, Issue 1, 2024-2025, Pages 38-46]
  • NIR Rapid detection of pesticide-contaminated product using novel methods of NDT Technology [Volume 2, Issue 2, 2017-2021, Pages 58-65]
  • Noise Reduction Appropriate Feature Selection for Creating Health Index in Rotary Machines Utilizing the Prognostic Health Management System [Volume 2, Issue 6, 2017-2021, Pages 53-61]
  • Non-Destructive Non-destructive residual stress measurement using digital image correlation method [Volume 2, Issue 3, 2017-2021, Pages 50-58]
  • Non-Destructive Hazelnut Sorting Using Acoustic Response [Volume 4, Issue 1, 2024-2025, Pages 72-84]
  • Non-destructive analysis A Study of the Materials Used in Teymorid Miniature by Nondestructive Analyses [Volume 3, Issue 1, 2022-2024, Pages 64-71]
  • Non-Destructive Evaluation Non-Destructive Evaluation of High Chromium Cast Iron ‎Mill Balls with Eddy Current Test [Volume 2, Issue 2, 2017-2021, Pages 49-57]
  • Non-Destructive Evaluation Non-Destructive Testing of the Welded Joints Using Infrared Thermography Technique [Volume 3, Issue 3, 2022-2024, Pages 13-26]
  • Non-destructive evaluations Application of Electrochemical Impedance Spectroscopy (EIS) as an NDT method in Corrosion Monitoring and Analysis [Volume 2, Issue 5, 2017-2021, Pages 44-59]
  • Non-destructive inspection Application of the laser shearography in the non-destructive evaluation of the defects in the flat and curved surfaces made of carbon fiber composites [Volume 2, Issue 7, 2017-2021, Pages 14-23]
  • Non-destructive inspection Design of a Hybrid Data-Driven Classification Model for Optimal Selection of Non-Destructive Testing Methods in Weld Inspection [Volume 4, Issue 1, 2024-2025, Pages 57-71]
  • Nondestructive measurement of apple's pomace Nondestructive measurement of apple's pomace [Volume 2, Issue 1, 2017-2021, Pages 35-42]
  • Non-destructive test Investigation of digital shearography for the defect detection of different materials [Volume 2, Issue 3, 2017-2021, Pages 8-22]
  • Non-destructive test Diagnostic Ultrasound, a non-destructive approach for quality evaluation of Agro-food products [Volume 2, Issue 3, 2017-2021, Pages 32-41]
  • Non-destructive test The modern technology of non-destructive test using terahertz waves [Volume 2, Issue 3, 2017-2021, Pages 42-49]
  • Non-destructive test Leak Detection in Pressurized Pipe Using Acoustic Emission Method [Volume 2, Issue 4, 2017-2021, Pages 46-53]
  • Non-destructive test The Electronic Nose Technique for Non-Destructive clustering of Basil as a Medicinal Plant [Volume 2, Issue 4, 2017-2021, Pages 54-60]
  • Non-destructive test Implementation of neural networks for prediction of location and orientation of pipe defects in guided wave ultrasonic testing [Volume 2, Issue 8, 2017-2021, Pages 8-17]
  • Non-destructive test A Review on Using Ultrasonic Waves to Evaluate the Characteristics of Asphalt Pavement [Volume 3, Issue 2, 2022-2024, Pages 62-70]
  • Non-destructive test Non-destructive Testing of Planar Defects Using Shearography Method with Modulated Ultrasonic Excitation [Volume 3, Issue 3, 2022-2024, Pages 84-95]
  • Nondestructive Test Using of Modulated Thermography for Nondestructive Testing of Polymer Plates [Volume 2, Issue 4, 2017-2021, Pages 38-45]
  • Nondestructive Test Application of Active IR Thermography in Defect detection of FDM printed parts with different infill percentage [Volume 2, Issue 9, 2017-2021, Pages 2-12]
  • Nondestructive Test Experimental and numerical study of the design and development of a magnetic flux leakage inspection device to detect defects on ferromagnetic plate with the aim of optimizing the effective parameters [Volume 3, Issue 4, 2022-2024, Pages 1-10]
  • Non-destructive testing " Investigating Non-destructive Tests Used in the Inspection of Parts Produced by Additive Manufacturing (AM) Method, [Volume 3, Issue 3, 2022-2024, Pages 108-123]
  • Nondestructive testing Detection and Sizing of Fatigue Cracks in Metallic Structures from Eddy Current Probe Signals [Volume 2, Issue 2, 2017-2021, Pages 42-48]
  • Nondestructive testing Nondestructive apple quality assessment using acoustic-vibrational response and artificial neural network [Volume 2, Issue 9, 2017-2021, Pages 98-106]
  • Nondestructive testing Contrast Enhancement for NDT Images of Turbine Blades by Means of X-ray/Neutron Radiography [Volume 3, Issue 2, 2022-2024, Pages 39-48]
  • Nondestructive testing Investigating the defects of gas pipes with industrial gamma radiography method and weighted anisotropic–isotropic total variation [Volume 3, Issue 3, 2022-2024, Pages 47-55]
  • Non Destructive Testing (NDT) Detection of dimensions of axisymmetric surface defects located on the pipe using the first order symmetric torsional guided waves [Volume 2, Issue 7, 2017-2021, Pages 51-59]
  • Non-Destructive Testing (NDT) Capability of Digital Shearography in Crack Defect Inspection [Volume 2, Issue 8, 2017-2021, Pages 41-61]
  • Non-Destructive Testing (NDT) Implementation of the neutron computed tomography by means of Filtered-back Projection algorithm in Tehran Research Reactor [Volume 2, Issue 9, 2017-2021, Pages 129-139]
  • Non-Destructive Testing (NDT) Enhancing Image Accuracy and Clarity through Combined Neutron and Gamma Radiography for Internal Material Structure Analysis Using MCNP Simulation [Volume 4, Issue 1, 2024-2025, Pages 38-46]
  • Non-destructive tests Investigation in common defects in investment casting by industrial X-ray radiography in the oil and gas industry [Volume 2, Issue 8, 2017-2021, Pages 18-26]
  • Nondestructive Tests Implementing Thermal Image Processing Techniques for Enhancing the Detectability of Defects in Thermography of Additive Manufacturing Components [Volume 2, Issue 6, 2017-2021, Pages 36-45]
  • Nondestructive Tests Thermal signal reconstruction and employment of K clustering method for inspection of additive manufactured polymer parts [Volume 2, Issue 7, 2017-2021, Pages 60-69]
  • Non-destructive ultrasonic test Evaluation of mechanical properties of reinforced concrete based on non-destructive test of ultrasonic waves, Under high heat [Volume 2, Issue 9, 2017-2021, Pages 52-62]
  • Non-Destructive Ultrasonic Testing Novel Approach for Simultaneous Measurement of Elastic Properties and Attenuation Coefficients of ABS Polymers Using Ultrasonic Scattering [Volume 3, Issue 4, 2022-2024, Pages 86-98]
  • Non Destructivr Evaluation Nondestructive Evaluation of Gas Turbine Blade Cooling Holes Blockage by Thermography [Volume 2, Issue 6, 2017-2021, Pages 46-52]
  • Non-equilibrium plasma Evaluation of Plasma gliding-arc discharges electrode defects by positron annihilation life-time spectroscopy [Volume 2, Issue 7, 2017-2021, Pages 96-103]
  • Non-local means algorithms Use of non-local means algorithm and radiography to detect defects in aircraft parts [Volume 2, Issue 4, 2017-2021, Pages 3-8]
O
  • Oil Effect of Field Factors on the Evaluation of Corrosion of Storage Tanks Floor ‎by ‎Magnetic Flux Leakage Method [Volume 3, Issue 2, 2022-2024, Pages 27-38]
  • Oil Industry Implementation of Index Vectors Utilizing Artificial Intelligence to Enhance the Contrast of Weld Radiograph [Volume 4, Issue 1, 2024-2025, Pages 47-56]
  • Optical fiber A review on road structural health monitoring novel methods inside the pavement [Volume 2, Issue 8, 2017-2021, Pages 86-104]
  • Optical thermography A Review on Non-Destructive Identification of Defects in Fiber Reinforced Polymeric Base Composites [Volume 2, Issue 5, 2017-2021, Pages 14-29]
  • Outer Ring Detection of Incipient Failure of Rolling Element bearings by Vibration Analysis (Case Study) [Volume 2, Issue 6, 2017-2021, Pages 20-25]
P
  • Particle Swarm Optimization Detection and Sizing of Fatigue Cracks in Metallic Structures from Eddy Current Probe Signals [Volume 2, Issue 2, 2017-2021, Pages 42-48]
  • Pavement A review on road structural health monitoring novel methods inside the pavement [Volume 2, Issue 8, 2017-2021, Pages 86-104]
  • PCT Improving the nondestructive thermography inspection results for detection of circular defects in coated metals using principal component analysis [Volume 2, Issue 9, 2017-2021, Pages 33-40]
  • Pencil Beam Performance Evaluation of Backscatter Imaging System with Scintillator Detector and Pencil X-ray in Real Environment Conditions [Volume 4, Issue 1, 2024-2025, Pages 25-37]
  • Pesticide Residue Rapid detection of pesticide-contaminated product using novel methods of NDT Technology [Volume 2, Issue 2, 2017-2021, Pages 58-65]
  • Piezoelectric Non-destructive Testing of Planar Defects Using Shearography Method with Modulated Ultrasonic Excitation [Volume 3, Issue 3, 2022-2024, Pages 84-95]
  • Pipe inspection robots A Review on Inspection Methods of Pipelines [Volume 2, Issue 4, 2017-2021, Pages 9-20]
  • Polymer Using of Modulated Thermography for Nondestructive Testing of Polymer Plates [Volume 2, Issue 4, 2017-2021, Pages 38-45]
  • Polymer matrix material Application of the laser shearography in the non-destructive evaluation of the defects in the flat and curved surfaces made of carbon fiber composites [Volume 2, Issue 7, 2017-2021, Pages 14-23]
  • Pressurized Pipe Leak Detection in Pressurized Pipe Using Acoustic Emission Method [Volume 2, Issue 4, 2017-2021, Pages 46-53]
  • Principal component analysis The Electronic Nose Technique for Non-Destructive clustering of Basil as a Medicinal Plant [Volume 2, Issue 4, 2017-2021, Pages 54-60]
  • Projection function Projection Data Acquisition in Industrial Fan-Beam Computed Tomography Using Monte Carlo Modeling in Gas and Oil Pipelines Non-destructive testing [Volume 2, Issue 7, 2017-2021, Pages 88-95]
  • Pulsed Thermography Evaluating the Circular Defect Detection Capability in Thermography Testing by the Use of Analytical Method [Volume 3, Issue 1, 2022-2024, Pages 23-31]
  • Pulse Thermography Inspection of flight control surfaces made by honeycomb sandwich panels with use of Thermography method and Air Injection [Volume 2, Issue 4, 2017-2021, Pages 21-31]
Q
  • Quality assessment Nondestructive Quality Assessment of Extra Virgin Olive Oil by Ultrasound [Volume 2, Issue 6, 2017-2021, Pages 62-71]
  • Quality Control Metallurgical Quality Control of Aged 7075 Al Alloy Using Eddy Current Nondestructive Testing Method [Volume 2, Issue 6, 2017-2021, Pages 26-35]
  • Quality Control Designing a system for detection and analysis of transformer electrical insulation contamination (ICAS) based on radiographic images processing [Volume 2, Issue 7, 2017-2021, Pages 104-113]
  • Quality Control Discriminability Assessment of MOS Sensors to Develop a Portable Electronic Nose System for Non-Destructive Quality Assessment of Medicinal Plants [Volume 2, Issue 9, 2017-2021, Pages 115-128]
R
  • Radation Profiler Non-destructive Evaluation of Corrosion Under Insulation in Oil and Gas Pipelines Using Gamma and X-ray Linear Profilers Using Monte Carlo Method [Volume 3, Issue 4, 2022-2024, Pages 60-67]
  • Radiation stimulation Thermography with Radiation Excitation for Non-Destructive Evaluation of Composite and Sheet Metal [Volume 2, Issue 5, 2017-2021, Pages 3-13]
  • Radiography Use of non-local means algorithm and radiography to detect defects in aircraft parts [Volume 2, Issue 4, 2017-2021, Pages 3-8]
  • Radiography Comparison of radiography testing and ultraviolet inspection in identifying hidden designs and defects of exquisite paintings [Volume 2, Issue 7, 2017-2021, Pages 79-87]
  • Radiography A study of internal structure of two antique handguns by means of radiographic inspection [Volume 2, Issue 9, 2017-2021, Pages 63-68]
  • Radiography Improving Fire Safety: Feasibility of Gamma Ray Cargo Scanner Performance for Fire Extinguishers Inspection [Volume 3, Issue 3, 2022-2024, Pages 70-83]
  • Radioisotope Thickness Measurement Thickness Measurement of Metals Using Neural Network and Radioisotope Measurement-Modelling [Volume 3, Issue 2, 2022-2024, Pages 1-15]
  • Rail defects Design and fabrication of a non-destructive system for detecting and measuring cracks in RDD-S11 rail defect detector equipment [Volume 2, Issue 9, 2017-2021, Pages 41-51]
  • Rail defects Non-destructive determination of side and vertical wear at the surface of railways [Volume 2, Issue 9, 2017-2021, Pages 88-97]
  • Recursive filter Improvement of defect size Measurement in Radiography Images by Recursive Image Processing Method [Volume 3, Issue 4, 2022-2024, Pages 33-40]
  • Reference level Effectiveness of Interventional Actions in Reduction of Unusual Exposure in Industrial Radiography in Iran [Volume 2, Issue 4, 2017-2021, Pages 32-37]
  • Reflection coefficient Detection of dimensions of axisymmetric surface defects located on the pipe using the first order symmetric torsional guided waves [Volume 2, Issue 7, 2017-2021, Pages 51-59]
  • Reformer Nondestructive Evaluation of Reformer Tubes in Direct Reduction of Iron Unit by Eddy Current Test Method [Volume 2, Issue 7, 2017-2021, Pages 33-43]
  • Residual Austenite Non-Destructive Evaluation of High Chromium Cast Iron ‎Mill Balls with Eddy Current Test [Volume 2, Issue 2, 2017-2021, Pages 49-57]
  • Residual Stress Application of Digital Image Correlation method for measurement of residual stress (A review) [Volume 2, Issue 5, 2017-2021, Pages 70-82]
  • Residual Stress Numerical modeling of local residual stress detection in thin plates using the fundamental antisymmetric mode of ultrasonic Lamb waves [Volume 2, Issue 7, 2017-2021, Pages 70-78]
  • Residual Stress Measurement Non-destructive residual stress measurement using digital image correlation method [Volume 2, Issue 3, 2017-2021, Pages 50-58]
  • Resolution test. Contrast test Feasibility Study of Tomography using Cargo Scanner System by Modeling and Experimental Methods [Volume 2, Issue 9, 2017-2021, Pages 77-87]
  • Resonance Ultrasonic Spectroscopy Effect of Orders of Scattering in Linear Grating of Fibrous Reinforced Composites Using Resonance Ultrasonic Spectroscopy [Volume 2, Issue 8, 2017-2021, Pages 69-77]
  • Response Hazelnut Sorting Using Acoustic Response [Volume 4, Issue 1, 2024-2025, Pages 72-84]
  • Reverse Engineering The use of industrial radiography in troubleshooting and diagnosing the structure of electronic boards for reverse engineering [Volume 3, Issue 4, 2022-2024, Pages 23-32]
  • Rolling contact fatigue cracks Design and fabrication of a non-destructive system for detecting and measuring cracks in RDD-S11 rail defect detector equipment [Volume 2, Issue 9, 2017-2021, Pages 41-51]
  • Rotating machines Appropriate Feature Selection for Creating Health Index in Rotary Machines Utilizing the Prognostic Health Management System [Volume 2, Issue 6, 2017-2021, Pages 53-61]
S
  • Sensor Design Design and Construction of Magnetic Sensor Set to Detect Internal Defects Based on Magnetic Field Perturbation [Volume 2, Issue 7, 2017-2021, Pages 44-50]
  • Sewer pipelines A Review on Inspection Methods of Pipelines [Volume 2, Issue 4, 2017-2021, Pages 9-20]
  • Shearography Investigation of digital shearography for the defect detection of different materials [Volume 2, Issue 3, 2017-2021, Pages 8-22]
  • Shearography Capability of Digital Shearography in Crack Defect Inspection [Volume 2, Issue 8, 2017-2021, Pages 41-61]
  • Shearography Nondestructive Inspection of Agglomeration Defects in Polymer-Based Nano-Composites Using Laser Interferometry Method [Volume 3, Issue 1, 2022-2024, Pages 52-63]
  • Smart Systems The Role of Spectroscopy as an Optical Non-destructive Technology in Development of Smart Agriculture [Volume 2, Issue 5, 2017-2021, Pages 83-92]
  • SMAW Welding Non-destructive residual stress measurement using digital image correlation method [Volume 2, Issue 3, 2017-2021, Pages 50-58]
  • Sonic thermography A Review on Non-Destructive Identification of Defects in Fiber Reinforced Polymeric Base Composites [Volume 2, Issue 5, 2017-2021, Pages 14-29]
  • Sorting System Hazelnut Sorting Using Acoustic Response [Volume 4, Issue 1, 2024-2025, Pages 72-84]
  • Speckle pattern Feasibility of digital image correlation for non-destructive evaluation [Volume 2, Issue 7, 2017-2021, Pages 121-127]
  • Spectral Imaging The Role of Spectroscopy as an Optical Non-destructive Technology in Development of Smart Agriculture [Volume 2, Issue 5, 2017-2021, Pages 83-92]
  • Spectral Sensors The Role of Spectroscopy as an Optical Non-destructive Technology in Development of Smart Agriculture [Volume 2, Issue 5, 2017-2021, Pages 83-92]
  • Spectroscopy Rapid detection of pesticide-contaminated product using novel methods of NDT Technology [Volume 2, Issue 2, 2017-2021, Pages 58-65]
  • Spectroscopy The Role of Spectroscopy as an Optical Non-destructive Technology in Development of Smart Agriculture [Volume 2, Issue 5, 2017-2021, Pages 83-92]
  • Spot resistance welding INVESTIGATION OF NON-DESTRUCTIVE TESTING OF ULTRASONIC OF FOUR-SHEET STACK OF JOINTS AND FORMULATION OF ITS APPLICATION IN THE AUTOMOTIVE INDUSTRY. [Volume 2, Issue 3, 2017-2021, Pages 59-65]
  • Spot welding Evaluation of Tensile Strength of Spot Welding in DP590Steel SheetsUsing Ultrasonic Wave Attenuation [Volume 2, Issue 8, 2017-2021, Pages 62-68]
  • Steam Reformer Tube Evaluation of Severity and Type of Damages in Steam ‎Reformer Tubes using Nondestructive Eddy Current Method [Volume 4, Issue 1, 2024-2025, Pages 1-13]
  • Steel Wire Rope Improve the Quality of the Images Obtained by Magnetic Flux Leakage on Wire Ropes Using Wavelet Analysis [Volume 2, Issue 5, 2017-2021, Pages 38-43]
  • Step-Heating Thermography Evaluating the Circular Defect Detection Capability in Thermography Testing by the Use of Analytical Method [Volume 3, Issue 1, 2022-2024, Pages 23-31]
  • Storage tank Effect of Field Factors on the Evaluation of Corrosion of Storage Tanks Floor ‎by ‎Magnetic Flux Leakage Method [Volume 3, Issue 2, 2022-2024, Pages 27-38]
  • Storage Tank Floor Experimental and numerical study of the design and development of a magnetic flux leakage inspection device to detect defects on ferromagnetic plate with the aim of optimizing the effective parameters [Volume 3, Issue 4, 2022-2024, Pages 1-10]
  • Strain Gauge Experimental Study and leak investigation of Composite Pressure Vessel By Acoustic Emission Method [Volume 2, Issue 9, 2017-2021, Pages 13-32]
  • Strain measurement Investigation of digital shearography for the defect detection of different materials [Volume 2, Issue 3, 2017-2021, Pages 8-22]
  • Stress Corrosion Cracking Evaluation of Acoustic Emission Signals to Detect Stress Corrosion Cracking Mechanisms of AA7075-T6 Aluminum Pipe by Fuzzy Clustering Method (FCM) [Volume 3, Issue 3, 2022-2024, Pages 38-46]
  • Structural Defects Quality Assessment of Gypsum Structure Using Tomography Method (Modeling and Experimental) [Volume 3, Issue 1, 2022-2024, Pages 72-83]
  • Structural Health A review on road structural health monitoring novel methods inside the pavement [Volume 2, Issue 8, 2017-2021, Pages 86-104]
  • Study the most important causes of abnormal radiation in industrial radiography Study the most important causes of abnormal radiation in industrial radiography [Volume 2, Issue 1, 2017-2021, Pages 43-46]
  • Sub-surface defects Application of the laser shearography in the non-destructive evaluation of the defects in the flat and curved surfaces made of carbon fiber composites [Volume 2, Issue 7, 2017-2021, Pages 14-23]
  • Subsurface defects Feasibility of digital image correlation for non-destructive evaluation [Volume 2, Issue 7, 2017-2021, Pages 121-127]
  • Surface Hardening Case depth measurement of steel components by contact ultrasonic backscattering technique [Volume 2, Issue 9, 2017-2021, Pages 69-76]
  • Symmetric Defects Detection of dimensions of axisymmetric surface defects located on the pipe using the first order symmetric torsional guided waves [Volume 2, Issue 7, 2017-2021, Pages 51-59]
T
  • Tehran Research Reactor Design and construction of the neutron radiography facility for Tehran Research Reactor with real-time digital imaging capability [Volume 2, Issue 7, 2017-2021, Pages 24-32]
  • Tehran Research Reactor Implementation of the neutron computed tomography by means of Filtered-back Projection algorithm in Tehran Research Reactor [Volume 2, Issue 9, 2017-2021, Pages 129-139]
  • Teymorid Miniature A Study of the Materials Used in Teymorid Miniature by Nondestructive Analyses [Volume 3, Issue 1, 2022-2024, Pages 64-71]
  • Thermal Contrast Evaluating the Circular Defect Detection Capability in Thermography Testing by the Use of Analytical Method [Volume 3, Issue 1, 2022-2024, Pages 23-31]
  • Thermal Contrast-Based Techniques Employing Thermal Contrast Definitions to Improve Defect Detection Capability in Thermography Non-Destructive Testing [Volume 3, Issue 3, 2022-2024, Pages 27-37]
  • Thermal signal processing Employing Thermal Contrast Definitions to Improve Defect Detection Capability in Thermography Non-Destructive Testing [Volume 3, Issue 3, 2022-2024, Pages 27-37]
  • Thermography Using of Modulated Thermography for Nondestructive Testing of Polymer Plates [Volume 2, Issue 4, 2017-2021, Pages 38-45]
  • Thermography Implementing Thermal Image Processing Techniques for Enhancing the Detectability of Defects in Thermography of Additive Manufacturing Components [Volume 2, Issue 6, 2017-2021, Pages 36-45]
  • Thermography Nondestructive Evaluation of Gas Turbine Blade Cooling Holes Blockage by Thermography [Volume 2, Issue 6, 2017-2021, Pages 46-52]
  • Thermography Thermal signal reconstruction and employment of K clustering method for inspection of additive manufactured polymer parts [Volume 2, Issue 7, 2017-2021, Pages 60-69]
  • Thermography Article English Title for Nondestructive Testing Technology Journal Evaluation of X-Ray Radiography, Laser Shearography and I.R. Thermography in the defect detection of the Carbon Reinforced Polymer Composite Panels [Volume 2, Issue 8, 2017-2021, Pages 78-85]
  • Thermography Improving the nondestructive thermography inspection results for detection of circular defects in coated metals using principal component analysis [Volume 2, Issue 9, 2017-2021, Pages 33-40]
  • Thermography Evaluating the Circular Defect Detection Capability in Thermography Testing by the Use of Analytical Method [Volume 3, Issue 1, 2022-2024, Pages 23-31]
  • Thermography Employing Thermal Contrast Definitions to Improve Defect Detection Capability in Thermography Non-Destructive Testing [Volume 3, Issue 3, 2022-2024, Pages 27-37]
  • Thermography Evaluation and health monitoring of the thermal insulation honeycomb sandwich wall of the cryogenic tank by thermography method [Volume 3, Issue 4, 2022-2024, Pages 11-22]
  • Thermography A review of non-destructive inspection techniques inspection for wind turbine blades [Volume 3, Issue 4, 2022-2024, Pages 68-85]
  • Thin plates Numerical modeling of local residual stress detection in thin plates using the fundamental antisymmetric mode of ultrasonic Lamb waves [Volume 2, Issue 7, 2017-2021, Pages 70-78]
  • TOPSIS Prioritization of Critical Equipment in the Gas Compression Station Considering HSE Risk-Based Maintenance Planning [Volume 3, Issue 1, 2022-2024, Pages 84-92]
  • Total focusing method Implementation of an Imaging System Using Ultrasonic Phased Array [Volume 2, Issue 3, 2017-2021, Pages 23-31]
  • Transformer Insulation Contamination Designing a system for detection and analysis of transformer electrical insulation contamination (ICAS) based on radiographic images processing [Volume 2, Issue 7, 2017-2021, Pages 104-113]
  • Transmission and Reflection Coefficients Finite Element Modeling of Lamb Waves Propagation in a Thickness Variable Plate [Volume 2, Issue 6, 2017-2021, Pages 2-11]
  • Turbine blades Contrast Enhancement for NDT Images of Turbine Blades by Means of X-ray/Neutron Radiography [Volume 3, Issue 2, 2022-2024, Pages 39-48]
U
  • UK National Aerospace NDT Board UK National Aerospace NDT Board (NANDTB) [Volume 2, Issue 2, 2017-2021, Pages 14-18]
  • Ultrasonic Guided Waves Numerical Damage Detection in Composite Pipe Adhesive Joints Using Ultrasonic Guided Waves [Volume 2, Issue 6, 2017-2021, Pages 72-81]
  • Ultrasonic imaging Implementation of an Imaging System Using Ultrasonic Phased Array [Volume 2, Issue 3, 2017-2021, Pages 23-31]
  • Ultrasonic phased array Implementation of an Imaging System Using Ultrasonic Phased Array [Volume 2, Issue 3, 2017-2021, Pages 23-31]
  • Ultrasonic test INVESTIGATION OF NON-DESTRUCTIVE TESTING OF ULTRASONIC OF FOUR-SHEET STACK OF JOINTS AND FORMULATION OF ITS APPLICATION IN THE AUTOMOTIVE INDUSTRY. [Volume 2, Issue 3, 2017-2021, Pages 59-65]
  • Ultrasonic testing A Method for Full Testing Coverage of the Ends of Parts and Pipes in AUT [Volume 2, Issue 2, 2017-2021, Pages 38-41]
  • Ultrasonic testing Estimation of uncertainty in measurement of ultrasonic wave attenuation [Volume 2, Issue 7, 2017-2021, Pages 128-133]
  • Ultrasonic testing Determination of Elastic Constants of Additive Manufactured Inconel-625 parts by means of Ultrasonic Technique [Volume 2, Issue 7, 2017-2021, Pages 2-13]
  • Ultrasonic testing Case depth measurement of steel components by contact ultrasonic backscattering technique [Volume 2, Issue 9, 2017-2021, Pages 69-76]
  • Ultrasonic Testing (UT) In-Line Inspection (ILI) Methods of Pipelines [Volume 3, Issue 2, 2022-2024, Pages 84-92]
  • Ultrasonic waves Evaluation of Tensile Strength of Spot Welding in DP590Steel SheetsUsing Ultrasonic Wave Attenuation [Volume 2, Issue 8, 2017-2021, Pages 62-68]
  • Ultrasonic waves Effect of Orders of Scattering in Linear Grating of Fibrous Reinforced Composites Using Resonance Ultrasonic Spectroscopy [Volume 2, Issue 8, 2017-2021, Pages 69-77]
  • Ultrasound Diagnostic Ultrasound, a non-destructive approach for quality evaluation of Agro-food products [Volume 2, Issue 3, 2017-2021, Pages 32-41]
  • Ultrasound Nondestructive Quality Assessment of Extra Virgin Olive Oil by Ultrasound [Volume 2, Issue 6, 2017-2021, Pages 62-71]
  • Ultraviolet radiations Comparison of radiography testing and ultraviolet inspection in identifying hidden designs and defects of exquisite paintings [Volume 2, Issue 7, 2017-2021, Pages 79-87]
  • Uncertainty Estimation of uncertainty in measurement of ultrasonic wave attenuation [Volume 2, Issue 7, 2017-2021, Pages 128-133]
V
  • Vibrational Analysis Detection of Incipient Failure of Rolling Element bearings by Vibration Analysis (Case Study) [Volume 2, Issue 6, 2017-2021, Pages 20-25]
  • VVER-1000؛ BNPP Non-destructive inspection of Russian steam generators( PGV-1000M) model VVER-1000 [Volume 2, Issue 3, 2017-2021, Pages 66-72]
W
  • Wave propagation Detection of dimensions of axisymmetric surface defects located on the pipe using the first order symmetric torsional guided waves [Volume 2, Issue 7, 2017-2021, Pages 51-59]
  • Wave velocity Novel Approach for Simultaneous Measurement of Elastic Properties and Attenuation Coefficients of ABS Polymers Using Ultrasonic Scattering [Volume 3, Issue 4, 2022-2024, Pages 86-98]
  • Wear Non-destructive determination of side and vertical wear at the surface of railways [Volume 2, Issue 9, 2017-2021, Pages 88-97]
  • Weighted Median Filter Improvement Contrast of Welding Radiographs with Weighted Median Filter [Volume 3, Issue 4, 2022-2024, Pages 50-59]
  • Welded joint Detection of Cracks and Lack of Fusion in Butt Joint Arc Welding Using Low Cost Acoustical Sensors [Volume 4, Issue 1, 2024-2025, Pages 14-24]
  • Welded Joints Non-Destructive Testing of the Welded Joints Using Infrared Thermography Technique [Volume 3, Issue 3, 2022-2024, Pages 13-26]
  • Welding defects Fourier Transforms for Recognition of Weld Defects in Industrial Radiography [Volume 3, Issue 1, 2022-2024, Pages 13-22]
  • Welding nugget INVESTIGATION OF NON-DESTRUCTIVE TESTING OF ULTRASONIC OF FOUR-SHEET STACK OF JOINTS AND FORMULATION OF ITS APPLICATION IN THE AUTOMOTIVE INDUSTRY. [Volume 2, Issue 3, 2017-2021, Pages 59-65]
  • Weld Inspection Non-Destructive Testing of the Welded Joints Using Infrared Thermography Technique [Volume 3, Issue 3, 2022-2024, Pages 13-26]
  • Weld Inspection Design of a Hybrid Data-Driven Classification Model for Optimal Selection of Non-Destructive Testing Methods in Weld Inspection [Volume 4, Issue 1, 2024-2025, Pages 57-71]
  • Weld Radiographs Implementation of Index Vectors Utilizing Artificial Intelligence to Enhance the Contrast of Weld Radiograph [Volume 4, Issue 1, 2024-2025, Pages 47-56]
  • Wind Turbine Blades A review of non-destructive inspection techniques inspection for wind turbine blades [Volume 3, Issue 4, 2022-2024, Pages 68-85]
X
  • Xgboost Design of a Hybrid Data-Driven Classification Model for Optimal Selection of Non-Destructive Testing Methods in Weld Inspection [Volume 4, Issue 1, 2024-2025, Pages 57-71]
  • X-ray and neutron Radiography Contrast Enhancement for NDT Images of Turbine Blades by Means of X-ray/Neutron Radiography [Volume 3, Issue 2, 2022-2024, Pages 39-48]
  • X ray Beam Performance Evaluation of Backscatter Imaging System with Scintillator Detector and Pencil X-ray in Real Environment Conditions [Volume 4, Issue 1, 2024-2025, Pages 25-37]
  • X-ray Radiography Article English Title for Nondestructive Testing Technology Journal Evaluation of X-Ray Radiography, Laser Shearography and I.R. Thermography in the defect detection of the Carbon Reinforced Polymer Composite Panels [Volume 2, Issue 8, 2017-2021, Pages 78-85]