[1] Azin, A., Zhukov, A., Narikovich, A.,
Ponomarev, S., Rikkonen, S., & Leitsin, V.
(2018). Nondestructive testing method for a
new generation of electronics. MATEC Web
of Conferences, 143, 04007. YSSIP-2017.
[2] Lu, X., He, Z., Su, L., Fan, M., Liu, F., Liao, G., &
Shi, T. (2018). Detection of micro solder balls
using active thermography technology and kmeans algorithm. IEEE Transactions on
Industrial Informatics, 14(12), 5620–5628.
[3] Liu, S., & Ume, I.C. (2002). Vibration analysis
based modeling and defect recognition for
flip-chip solder-joint inspection. Journal of
Electronic Packaging, 124, 221–226.
[4] Liu, S., Erdahl, D., Ume, C., & Achari, A. (2000).
A novel method and device for solder joint
quality inspection by using laser ultrasound.
*Electronic Components and Technology
Conference, Las Vegas, NV, USA, 408–415.
[5] Huang, C.Y., Hong, J.H., & Huang, E. (2019).
Developing a machine vision inspection
system for electronics failure analysis. IEEE
Transactions on Components, Packaging and
Manufacturing Technology, 9(9), 1912–1925.
[6] Aryan, P., Sampath, S., & Sohn, H. (2018). An
overview of non-destructive testing methods
for integrated circuit packaging inspection.
Sensors, 18, 1981.
[7] Bansal, G., & Ramakrishna, K. (2011). A new
approach for early detection of PCB pad
cratering failures. Cisco Systems Inc., San
Jose, CA.
[8] Fu, Z., Goyal, D., Thomas, J., Crawley, A., &
Ramsey, A. (2003). 3D X-ray computed
tomography (CT) for electronic packages.
29th International Symposium for Testing
and Failure Analysis, Santa Clara, CA, USA.
[9] Global Industry Analysts, Inc. (2019).
Industrial X-ray inspection systems - Market
analysis, trends, and forecasts. USA.
[10] Zhang, Q., Zhang, M., Gamanayake, C., Yuen,
C., Geng, Z., Jayasekara, H., Woo, C., Low, J.,
Liu, X., & Guan, Y.L. (2022). Deep learning
based solder joint defect detection on
industrial printed circuit board X-ray images.
Complex & Intelligent Systems, 8, 1525–
1537. https://doi.org/10.1007/s40747-02100600-w.
[11] Villaraga-Gómez, H., & Bell, J.D. (2019).
Modern 2D & 3D X-ray technologies for
testing and failure analysis. *ISTFA
Proceedings, 45th International Symposium
for Testing and Failure Analysis.
[12] Yahaghi, E., Mirzapour, M., & Movafeghi, A.
(2020). Enhancing flaw detection in
aluminum castings by two different mixed
noise removal methods. Physica Scripta*, 95,
075302.
[13] Yahaghi, E., & Hosseini-Ashrafi, M.E. (2020).
Comparison of the performance of three
domain transform filters for radiographic
contrast enhancement of welded objects.
Insight, 62(6).
[14] Rudin, L.I., Osher, S., & Fatemi, E. (1992).
Nonlinear total variation based noise removal
algorithms. Physica D: Nonlinear Phenomena,
60(1-4), 259-268.
[15] Chambolle, A., Levine, S.E., & Lucier, B.J.
(2011). An upwind finite-difference method
for total variation–based image smoothing.
SIAM Journal on Imaging Sciences, 4(1), 277299.
[16] Abergel, R., & Moisan, L. (2017). The
Shannon total variation. Journal of
Mathematical Imaging and Vision, 59(2), 341370.
[17] ISO-17636-2. (2022). Non-destructive
testing of welds—Radiographic testing—Part
2: X- and Gamma-Ray techniques with digital
detectors. International Organization for
Standardization, Geneva.
[18] EN-12681-2. (2017). Founding. Radiographic
testing. Techniques with digital detectors.
European Standards Organization.
[19] MacRumors. (2018). 2018 iPhones wireless
charging copper coil rumor. Retrieved from
https://www.macrumors.com/2018/08/20/2
018-iphones-wireless-charging-copper-coilrumor/.
[20] Condat, L. (2017). Discrete total variation:
New definition and minimization. SIAM
Journal on Imaging Sciences, 10(3), 12581290.
[21] Ma, S. (2016). Alternating proximal gradient
method for convex minimization. Journal of
Scientific Computing, 68(2), 546-572.
[22] Deng, W., & Yin, W. (2016). On the global
and linear convergence of the generalized
alternating direction method of multipliers.
Journal of Scientific Computing, 66(3), 889916.